Louisville Tin and Stove BFT201, BFT301, BFT102 Clearances, Tools and Additional Supplies Required

Page 6

INSTALLATION - CONTINUED

3)Protect heater from wind, high traffic areas, and drafts (such as doorways, locations that get direct air from a ceiling fan, etc.) as this will cause nuisance pilot outage.

4)All models may be wall mounted using the factory supplied (standard) wall mounting bracket. Additionally all models may be installed freestanding, by adding the optional VF-FSK Floor Stand Kit and using an approved, fire resistant floor mat (available from factory). NOTE: Both wall and floor mount installations require hard piping.

5)If optional blower is to be added, locate heater so there is safe access to an electrical outlet.

CLEARANCES

1)Maintain adequate accessibility clearances for servicing and proper operation.

2)Minimum clearances as viewed from front of heater, see Fig. 1. 3” clearance below heater shall be measured from top surface of carpeting, tile, etc.

3)If VF-FSK Free Standing Kit is used and the heater is installed directly on carpeting, tile, or other combustible material other than wood flooring, the appliance shall be installed on a metal or wood panel extending the full width and depth of the appliance, such as a stove board.

TOOLS AND ADDITIONAL SUPPLIES

REQUIRED

1)Pipe wrenches (2).

2)Phillip head screwdriver or screwgun.

3)Pressure test gauge.

4)An A.G.A. certified manual shut off valve with 1/8” NPT pressure tap.

5)Union connector for type of piping used (check local codes).

6)Pipe sealant certified for use with L.P. gas.

7)Components to assemble a drip leg.

8)Level.

9)Drill (if anchors are required).

ROUGH-IN GAS SUPPLY

1)Determine location of heater. (See “Operation”, “Fresh Air”, and “Safety Instructions” for details.

2)Install at least a ½” diameter gas supply line. (Gas supply can enter through bottom or back of heater). See Figure 2.

36”

6”

 

 

 

6”

 

 

 

 

3”

FIGURE 1

1-5/8”13-1/16”

GAS INLET LOCATION

FIGURE 2

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Blue Flame Vent Free Heaters What to do if YOU Smell GASIntroduction Illustrated Parts BREAKDOWN……… Tools & Additional SUPPLIES…Introduction CONT’D Room Heater SpecificationsSafety Instructions OperationFresh AIR for COMBUSTION, Ventilation and Heat Distribution Installation LocationClearances Tools and Additional Supplies RequiredNA Gastural Feet Pipe LengthPropane GAS Installing Heater Wall Mount BFT10 Installing VF-FSK Floor Base KITWall Mount Specific Elevation GAS ConnectionBurner Orifice Natural GASFor Your Safety Read Before Lighting Proper Operation ODS / Pilot Flame Main Burner MaintenanceCabinet ODS/PILOTBlower Instructions Trouble Shooting Guide Symptom Possible Causes Corrective ActionModel Included NAT. GAS L.P. GAS BFT101 BFT102 BFT201 BFT202 BFT301 BFT302Model Numbers NAT Critical Safety Points to Remember Tampering is DangerousLimited Warranty Table a

BFT301, BFT302, BFT102, BFT201, BFT202 specifications

Louisville Tin and Stove has established itself as a reputable name in the world of heating solutions, offering a range of innovative products designed for both efficiency and comfort. Among their notable offerings are the BFT101, BFT302, BFT201, BFT102, and BFT202 models. Each of these units boasts unique features, technologies, and characteristics that cater to various customer needs.

The BFT101 is designed with compact living spaces in mind. It offers an intuitive user interface that ensures easy operation. Its efficient heat exchange system allows for rapid heating, providing warm air quickly and effectively. The BFT101's sleek design fits seamlessly into any room, making it an aesthetic addition to home décor while ensuring functionality.

The BFT302 takes efficiency a notch higher with advanced thermal technology. This model is equipped with a dual-fuel capability, allowing users to switch between different energy sources, such as gas or electric. The BFT302's smart thermostat provides precise temperature control, optimizing energy consumption without compromising comfort. Additionally, it comes with a built-in safety mechanism that ensures the unit operates seamlessly and safely.

For larger spaces, the BFT201 model stands out with its powerful heating capabilities. This unit features a robust construction designed to withstand prolonged usage while delivering consistent heat throughout the area. The BFT201 is also compatible with smart home technology, allowing users to control the heating remotely, a feature that provides convenience and enhances user experience.

The BFT102 is favored for its versatility. It operates efficiently in various environments, whether it’s a residential setting or a commercial space. Equipped with multiple heating settings, the BFT102 can easily adapt to changing temperature needs. Its low emissions make it an eco-friendly choice, aligning with sustainability goals without sacrificing performance.

Lastly, the BFT202 offers a combination of elegance and innovation. This model is equipped with advanced filtration technology that not only heats efficiently but also cleans the air, ensuring a healthier environment. The BFT202 features a whisper-quiet operation, making it suitable for bedrooms and offices where noise reduction is important.

In summary, the Louisville Tin and Stove BFT series, including the BFT101, BFT302, BFT201, BFT102, and BFT202, provides a comprehensive range of heating solutions that cater to a variety of spaces and customer preferences. Each model is designed with state-of-the-art technology, focusing on energy efficiency, safety, and user convenience, making them excellent choices for modern heating needs.
Top Page Image Contents