Harman Stove Company R16 manual #1 Preferred method, #2 Preferred method

Page 11

Venting

NOTICE

Use only components specified by the venting manufacturer or the appliance manufacturer, including

the proper wall pass-through and termination cap. The use of mis-matched or makeshift venting

components may cause exhaust spillage and/or increase fire risk.

#1 Preferred method

This method provides excellent venting for normal operation and allows the stove to be installed closest to the wall. Two inches from the wall is safe; however, four inches allows better access to remove the rear panel. The vertical portion of the vent should be three to five feet high. This vertical section will help provide natural draft in the event of a power failure. Note: Do not place joints within wall pass-throughs.

3 ft.

to

Combustibles

Shaded area represents the minimum clearance to combustible materials such as shrubbery, mulch or tall grasses.

12" min. wall to outlet

Fig. 9

3 ft.

to Combustibles

Fig. 11

3 ft.

to

Combustibles

Fig. 10

 

3 ft.

 

 

to Combustibles

#2 Preferred method

This method also provides excellent venting for normal operation but requires the stove to be installed farther from the wall. The vertical portion of the vent should be three to five feet high and at least three inches from a combustible wall. This vertical section will provide natural draft in the event of a power failure.

If the stove is installed below grade be sure the vent termination is at least 18" above grade. The outlet must also be 1 foot from the house/building.

Note: Do not place joints within wall pass- throughs.

CAUTION

Keep any materials that may be affected by the elevated exhaust temperatures at least 3 feet away from the flue termination

XXV Pellet Stove 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents R16 Installation & Operating ManualPage Fuel and Fuel Storage Fuel SpecificationsSerial # Model IntroductionAppliance Certification Important Notes Assembly and InstallationFloor Protection InstallationApplies VentingAddition, the following must be observed Vent Pipe Do not connect to any air distribution duct or systemVenting Direct Vent Wall Passthrough Avoiding Smoke and Odors#2 Preferred method #1 Preferred method#3 Installing into an existing chimney #6 Installing into an existing chimney US and Canada #8 Installing through the ceiling Vent Configurations Minimum flue vent configurationESP Control Blinks In Igniter Auto. Mode Only Indicates thatLow Draft Voltage Adjustment Low Draft Voltage AdjustmentAutomatic IGNITION/OPERATION Room Temperature ModeShut Down Procedure Stove Temperature ModeFeed Adjuster Knob Automatic Start UP Turn Feed Adjuster to #4.4Manual IGNITION/Operation Room Temperature ModeStove Temperature Mode Fill the hopper with pellets and remove ashes as required.1 Igniter Switch to Manual up positionManual Start UP Room sensor Installation Room Sensor InstallationRemoving Ashes MaintenanceCleaning ESP Not coiled inside the burn pot Maintenance Burn PotBurn Pot Cleaning and Maintenance Viewing Glass Harman OptionsXXV Top Flue Option Direct Vent Wall PassthroughFuel Trouble-ShootingCleaning Burn Pot Helpful HintsWiring Diagram SpecificationsXXV Pellet Stove Hearth & Home Technologies Inc Limited Lifetime WarrantyThis warranty is void if Warranty ConditionsChanges to Maintenance Schedule Operation in Stove Temp modeOperation in Room Temp mode Part number list on following Service PartsActive Retired unitsStocked At depotNo longer available Stocked at depotXXV Pellet Stove Stocked #44 Feeder assembly Post Serial numberHardware Packages Service & Maintenance Log Service & Maintenance Log Page Proudly Printed On 100% Recycled Paper Signature of Boxer

R16 specifications

The Harman Stove Company R16 is a testament to innovative design and efficiency in the world of heating solutions. Built to provide both comfort and style, this stove stands out with its blend of traditional appeal and modern technology.

One of the key features of the R16 is its impressive heating capacity. It is designed to effectively warm up medium to large spaces, making it an ideal choice for homes and cabins alike. With a high BTU output, the R16 optimizes fuel use while distributing heat uniformly, ensuring the entire area remains cozy even in the coldest months.

Another highlight of the R16 is its advanced combustion technology. The stove incorporates a clean-burning system that not only maximizes efficiency but also reduces emissions. This environmentally friendly approach aligns with the growing commitment to sustainability in heating solutions. The R16 can burn a variety of fuels, including wood, making it versatile and convenient for different users.

The design of the R16 also supports ease of use and maintenance. It features a user-friendly control panel, allowing owners to adjust settings effortlessly. Additionally, the stove is equipped with a large glass door, providing an unobstructed view of the flames and enhancing the ambiance of any room.

Durability is another characteristic of the R16. Constructed with high-quality materials, this stove is built to last. The cast iron body ensures excellent heat retention, while the elegant finish complements a variety of interior styles.

Safety is paramount in the design of the Harman R16. It comes with built-in safety features, including a heat shield and an effective flue system that minimizes the risk of overheating and ensures safe operation.

In conclusion, the Harman Stove Company R16 combines cutting-edge technology, efficiency, and aesthetic appeal. With its powerful heating capabilities, clean combustion system, ease of use, and robust design, it stands out as a leading choice for those seeking a reliable and stylish heating solution for their spaces. The R16 not only provides warmth but also enhances the overall experience of a home, making it a worthy investment for any homeowner.
Top Page Image Contents