Fujitsu ASU12RLS Adjusting the Direction of AIR Circulation, Types of Air flow Direction Setting

Page 11

ADJUSTING THE DIRECTION OF AIR CIRCULATION

●Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Control Unit.

●Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped moving.

Vertical Air Direction Adjustment

Press the SET button (Vertical) (Fig. 6 b9).

Each time the button is pressed, the air direction range will change as follows:

RDANGER!

●Never place fingers or foreign objects in- side the outlet ports, since the internal fan operates at high speed and could cause personal injury.

1 2 3 4 5 6 7

Types of Air flow Direction Setting:

For better heating/cooling effect, it is recommended to set the air direction in the following range.

1,2,3 : During Cooling/Dry modes

4,5,6,7: During Heating mode

The Remote Control Unit’s display does not change.

●Use the air direction adjustments within the ranges shown above.

●The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.

During Cooling/Dry mode : Horizontal flow 1

During Heating mode

: Downward flow 6

●During AUTO mode operation, for the first minute after beginning operation, airflow will be horizontal 1; the air direction cannot be adjusted during this pe- riod.

The air flow direction setting will temporarily become 1 when the temperature of the air flow is low at the start of the Heating mode.

●Always use the Remote Control Unit’s SET button to adjust the vertical airflow louvers. Attempting to move them manually could result in improper op- eration; in this case, stop operation and restart. The louvers should begin to operate properly again.

●During use of the Cooling and Dry modes, do not set the Air Flow Direc- tion Louvers in the Heating range (4 - 7) for long periods of time, since wa- ter vapor may condense near the out- let louvers and drops of water may drip from the air conditioner. During the Cooling and Dry modes, if the Air Flow Direction Louvers are left in the heat- ing range for more than 30 minutes, they will automatically return to posi- tion 3.

●When used in a room with infants, chil- dren, elderly or sick persons, the air direction and room temperature should be considered carefully when making settings.

Horizontal Air Direction Adjustment

Press the SET button (Horizontal)(Fig. 6 b10).

●Each time the button is pressed, the air direction range will change as follows:

1 2 3

The remote control unit’s display does not change.

En-10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Mode D’EMPLOI Safety Precautions ContentsSleep Timer Timer MIN. Heat Coil DRY Features and FunctionsEconomy Maintenance En-3 Name of Parts Preparation Operation About Auto Changeover Operation About Mode OperationTo Stop Operation Press the START/STOP button b8 Set the desired times for OFF timer and on timer Timer OperationOFF timer or on timer operation To Use the Program timer Press the START/STOP button b8During Cooling/Dry operation Sleep Timer OperationAbout the Sleep Timer During Heating operationTypes of Air flow Direction Setting Adjusting the Direction of AIR CirculationAbout Swing Operation Swing OperationCoil DRY Operation To select Swing Operation Press the Swing button b11About the Minimum Heat Operation Timer Sleep FAN Speed SwingMinimum Heat Operation Manual Auto OperationCleaning and Care Open the Open Panel and remove the Air fil- ters Replace them by two new Air cleaning filtersInstall the two Air filters and close the Open Panel Replacing dirty Air cleaning filtersFunction TroubleshootingSymptom Problem NormalAuto Restart Event of Power InterruptionOperating Tips Operation and PerformanceTemperature and Humidity Range Specification

AOU12RLS, Heat & Cool Model (Reverse Cycle), ASU12RLS, AOU9RLS, ASU9RLS specifications

The Fujitsu ASU9RLS, AOU12RLS, ASU12RLS, and AOU9RLS models represent the pinnacle of advanced climate control solutions, combining energy efficiency with exceptional performance in both heating and cooling applications. These reverse cycle air conditioning systems are designed to cater to a wide range of residential and light commercial environments, ensuring comfort throughout the year.

One of the standout features of these models is the inverter technology that optimizes energy consumption. By continuously adjusting the compressor speed to maintain the desired temperature, these units minimize fluctuations, thereby enhancing comfort and reducing energy bills. This technology also leads to quieter operation, making it an excellent choice for homes and offices where noise level is a concern.

The ASU series offers a sleek and modern design, allowing it to blend seamlessly into various interior decors. User-friendly remote controls and smart sensors enable easy management and monitoring of temperature settings, ensuring users can maintain their ideal comfort levels with minimal effort. Additionally, the models are equipped with a range of air filtration systems, including washable filters that effectively capture dust and allergens, contributing to healthier indoor air quality.

Fujitsu's commitment to energy efficiency is further reflected in the high star ratings for these models, which comply with the latest environmental standards. The reverse cycle capability not only provides effective cooling during the hotter months but also ensures efficient heating when temperatures drop, making these models versatile and cost-effective.

Durability is another hallmark of Fujitsu's design philosophy. The units are built with high-quality materials, ensuring longevity and resistance to various environmental conditions. Advanced technology is also used to ensure that the outdoor units can operate effectively even in extreme weather conditions, providing reliable performance year-round.

In summary, the Fujitsu ASU9RLS, AOU12RLS, ASU12RLS, and AOU9RLS models offer an ideal combination of energy efficiency, exceptional performance, and advanced technology. Their inverter systems, stylish design, effective filtration, and durability make them an excellent choice for anyone looking to enhance their indoor climate control while maintaining energy efficiency. Whether for a cozy home or a productive office space, these reverse cycle units are engineered to deliver comfort and reliability in any season.
Top Page Image Contents