Fujitsu AOU9RLS, ASU9RLS, ASU12RLS manual About Swing Operation, About Coil DRY Operation

Page 12

SWING OPERATION

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 6 b11).

The SWING Display (Fig. 7 c8) will light.

Each time the SWING button is pressed, the swing operation will change in the following order.

Up/down swing operation Left/right swing operation

Swing operation stops Up/down/left/right swing operation

To stop SWING Operation

Press the SWING button and select STOP.

Airflow direction will return to the setting before swing was begun.

About Swing Operation

●Up/down swing: Swing operation begins using the following range according to the current airflow direc- tion.

Airflow direction is 1–5 (for cooling, dry).

With the upper airflow-direction louver in the horizontal position, the lower airflow-direction louver moves (swings) to direct airflow to a wide area.

Airflow direction is 3–7 (for heating).

With the airflow-direction louvers set for down- ward or straight down airflow, airflow is directly mainly at the floor.

●Left/right swing: The airflow-direction louvers move (swing) in the left/right airflow direction.

●Up/down/left/right swing: The airflow-direction louvers move (swing) in both the up/down and left/right airflow directions.

●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

●If the SET button(Vertical) is pressed during the up/ down swing operation, the up/down swing operation will stop and if the SET button(Horizontal) is pressed during the left/right swing operation, the left/right swing operation will stop.

COIL DRY OPERATION

The Indoor unit can be dried by pressing the COIL DRY button on the Remote Control Unit so as to avoid going moldy and restrain the breed of bacterium.

The COIL DRY Operation will operate for 90 minutes after pressing the COIL DRY button and it will stop automatically.

To select COIL DRY Operation

Press the COIL DRY button (Fig. 6 b4) during operation or when it stops.

The COIL DRY Indicator lamp (yellow) will light.(Then OPERATION Indicator lamp doesn’t light.)

The COIL DRY Display (Fig. 7 c4) will light. Then it will disappear after 10 seconds.

To cancel COIL DRY Operation

Press the START/STOP button (Fig. 6 b8) during COIL DRY

Operation.

When the COIL DRY Display

Light up: Press the START/STOP button once

Light off: Press the START/STOP button twice.

The COIL DRY Indicator lamp (yellow) (Fig.3 a7) will go out.

Then the operation stops.

About COIL DRY Operation

●Press the COIL DRY button again during COIL DRY Operation, COIL DRY Opera- tion can be reset.

●The COIL DRY Operation cannot get rid of the existed mould or bacterium, and it has no sterilization effect either.

En-11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Mode D’EMPLOI Contents Safety PrecautionsFeatures and Functions Economy MaintenanceSleep Timer Timer MIN. Heat Coil DRY En-3 Name of Parts Preparation Operation About Mode Operation To Stop Operation Press the START/STOP button b8About Auto Changeover Operation Timer Operation OFF timer or on timer operationTo Use the Program timer Press the START/STOP button b8 Set the desired times for OFF timer and on timerSleep Timer Operation About the Sleep TimerDuring Heating operation During Cooling/Dry operationAdjusting the Direction of AIR Circulation Types of Air flow Direction SettingSwing Operation Coil DRY OperationTo select Swing Operation Press the Swing button b11 About Swing OperationTimer Sleep FAN Speed Swing Minimum Heat OperationManual Auto Operation About the Minimum Heat OperationCleaning and Care Replace them by two new Air cleaning filters Install the two Air filters and close the Open PanelReplacing dirty Air cleaning filters Open the Open Panel and remove the Air fil- tersTroubleshooting Symptom ProblemNormal FunctionEvent of Power Interruption Operating TipsOperation and Performance Auto RestartSpecification Temperature and Humidity Range

AOU12RLS, Heat & Cool Model (Reverse Cycle), ASU12RLS, AOU9RLS, ASU9RLS specifications

The Fujitsu ASU9RLS, AOU12RLS, ASU12RLS, and AOU9RLS models represent the pinnacle of advanced climate control solutions, combining energy efficiency with exceptional performance in both heating and cooling applications. These reverse cycle air conditioning systems are designed to cater to a wide range of residential and light commercial environments, ensuring comfort throughout the year.

One of the standout features of these models is the inverter technology that optimizes energy consumption. By continuously adjusting the compressor speed to maintain the desired temperature, these units minimize fluctuations, thereby enhancing comfort and reducing energy bills. This technology also leads to quieter operation, making it an excellent choice for homes and offices where noise level is a concern.

The ASU series offers a sleek and modern design, allowing it to blend seamlessly into various interior decors. User-friendly remote controls and smart sensors enable easy management and monitoring of temperature settings, ensuring users can maintain their ideal comfort levels with minimal effort. Additionally, the models are equipped with a range of air filtration systems, including washable filters that effectively capture dust and allergens, contributing to healthier indoor air quality.

Fujitsu's commitment to energy efficiency is further reflected in the high star ratings for these models, which comply with the latest environmental standards. The reverse cycle capability not only provides effective cooling during the hotter months but also ensures efficient heating when temperatures drop, making these models versatile and cost-effective.

Durability is another hallmark of Fujitsu's design philosophy. The units are built with high-quality materials, ensuring longevity and resistance to various environmental conditions. Advanced technology is also used to ensure that the outdoor units can operate effectively even in extreme weather conditions, providing reliable performance year-round.

In summary, the Fujitsu ASU9RLS, AOU12RLS, ASU12RLS, and AOU9RLS models offer an ideal combination of energy efficiency, exceptional performance, and advanced technology. Their inverter systems, stylish design, effective filtration, and durability make them an excellent choice for anyone looking to enhance their indoor climate control while maintaining energy efficiency. Whether for a cozy home or a productive office space, these reverse cycle units are engineered to deliver comfort and reliability in any season.
Top Page Image Contents