TIMER OPERATION (WEEKLY TIMER)
6Presstime. the SET TIME button to set the day’s first OFF
AM
ON
PM TIMER | DAY |
WEEKLY
The earliest OFF time you can set is 5 minutes after the ON time. The latest OFF time is 11:55 p.m. on the subsequent day.
1
OFF
7 | Press the SET button. |
|
This registers the first OFF time | for the day, completing the “WEEKLY 1” |
settings for that day.
The display switches to “WEEKLY 2”, and the day’s second ON time be- gins flashing.
TIMER SET TIME TEMP./DAY | FAN |
MODE | CONTROL |
MASTER
CONTROL
CLOCK ADJUST
6
ZONE | ENERGY SAVE START/STOP |
SET | DAY OFF |
8Repeat the operations described in Steps 4 to 7 to set the second ON and OFF times for the day (the “WEEKLY
2” times).
When you press the SET button after setting the “WEEKLY 2” OFF time, the system registers the “WEEKLY 2” settings for the day and returns you to the “WEEKLY 1” ON time setup process. (The first ON setting reap- pears and begins flashing.)
You can review your settings by pressing the SET button. Each press moves you to the next setting, as follows.
s WEEKLY 1 | s WEEKLY 1 | s WEEKLY 2 | s WEEKLY 2 |
ON | OFF | ON | OFF |
7
If the timer is not set, press the SET but-
ton with the time display blank “
”, and perform next operation.
9Press the TEMP./DAY button to select another day for setup. The repeat steps 4 to 8 above to set the ON and OFF times for that day.
10When you have finished setting all of the times, hold down the SET button for 3 seconds.
The WEEKLY display flashes for 3 seconds while the new WEEKLY TIMER settings are registered, and then the clock display reappears.
AM CLOCK
NOTES:
(1)If no time values are flashing, the clock display will automatically reappear after 15 seconds if no buttons are pressed.
(2)A flashing time value indicates that the system is in
(3)You do not need to set values for both WEEKLY 1 and WEEKLY 2. If you wish, you can set values only for WEEKLY 1 or only for WEEKLY 2.
(4)The allowable range for the day’s time settings is shown below.
Cannot set | 5 min. | Available range | 5 min. | Cannot set |
ON | OFF |
| ON | OFF |
Previous day’s WEEKLY |
| Next day’s WEEKLY | ||
settings |
|
|
| settings |
12:00 a.m. |
| 12:00 a.m. |
| |
(5) If you set the OFF time to occur on the day following the ON time, the NEXT DAY caption appears on the display.
PM
PM TIMER
WEEKLY
2 NEXT DAY
ON
OFF
DAY