TIMER OPERATION (OFF TIMER/ON TIMER)
Before using the timer function, be sure that the remote controller is set to the correct current time and Day. Press the START/STOP button; after the unit starts operation perform the following procedure:
OFF Timer / ON Timer
1
Press the TIMER MODE button and display either OFF Timer or ON Timer.
The timer will start operating. (If you set the ON timer, the air conditioner will stop operating).
Each time the button is pressed the timer function changes in the follow- ing order:
| sNON STOP (RESET) | sOFF | sON | s WEEKLY |
|
|
| ||||
|
|
|
|
|
|
AM | CLOCK |
|
|
OFF |
| °F | COOL |
TIMER AM | TIMER |
| |
|
| ||
| OFF |
| |
TIMER | SET TIME | TEMP./DAY | FAN |
MODE |
|
| CONTROL |
|
|
| MASTER |
|
|
| CONTROL |
CLOCK ADJUST |
|
|
|
| 1 | 2 | ENERGY SAVE START/STOP |
|
| ZONE | |
|
| SET | DAY OFF |
2
Press the SET TIME button and set the timer time.
▲ : Use to advance the time forward. | AM | CLOCK |
|
|
|
|
OFF | °F |
|
|
| COOL | |
| ||||||
▼ : Use to turn the time back. | TIMER | PM TIMER |
|
|
|
|
|
|
|
| |||
| OFF |
|
|
|
| |
(Press once to move the time 1 minute; hold down and the time will move |
|
|
|
|
|
|
10 minutes at a time.) | Example: Setting the OFF TIMER | |||||
| to 11:35 p.m. |
|
|
|
| |
To confirm or Change Settings Before Starting Operation
●To confirm settings
Press the TIMER MODE button once. (The timer setting information will be displayed for 15 seconds after the TIMER MODE button is pressed.)
●To change settings
Confirm the settings as noted above, then press the SET TIME button and TIMER MODE button as necessary to change the desired timer setting. (The timer settings will be displayed for 15 seconds after the button is pressed.)
●After confirming or changing the set- tings, press the START/STOP button to start operation.
To Change the Timer Setting | To Cancel the Timer Mode |
During Operation | During Timer Operation |
Operate as noted in step 2. | Press the TIMER MODE button and set |
| the display to “NON STOP” (the unit will |
| switch to |
To Change the Timer Mode |
| To Stop Operation During |
During Operation |
| Use of Timer Mode |
|
|
|
Press the TIMER MODE button and set | Press the START/STOP button. | |
the unit to the desired mode.