Important Safety Information

THIS IS A HEATING APPLIANCE

DO NOT OPERATE THIS APPLIANCE WITHOUT FRONT PANEL INSTALLED.

• An unvented room heater having an input rating of more	•	Installation and repair should be done by a QUALIFIED
than 6,000 Btu per hour shall not be installed in a		SERVICE PERSON. The appliance should be inspected
bathroom.		before use and at least annually by a professional service
• An unvented room heater having an input rating of more		person. More frequent cleaning may be required due to
than 10,000 Btu per hour shall not be installed in a		excessive lint from carpeting, bedding materials, etc. It is
bedroom or bathroom.		imperative that control compartments, burners and
• Due to high temperatures, the appliance should be		circulating air passageways of the appliance be kept clean.
• Due to high temperatures, the appliance should be	•	DO NOT use this room heater if any part has been under
located out of traffic and away from furniture and	•	DO NOT use this room heater if any part has been under
draperies.		water. Immediately call a qualified service technician to
• Children and adults should be alerted to the hazard of		inspect the room heater and to replace any part of the
• Children and adults should be alerted to the hazard of		control system and any gas control which has been under
high surface temperature and should stay away to avoid		control system and any gas control which has been under
high surface temperature and should stay away to avoid		water.
burns or clothing ignition.		water.
burns or clothing ignition.	•	Keep appliance area clear and free from combustible
• Young children should be carefully supervised when they	•	Keep appliance area clear and free from combustible
• Young children should be carefully supervised when they		materials, gasoline and other flammable vapors and liquids.
are in the same room with the appliance.		materials, gasoline and other flammable vapors and liquids.
are in the same room with the appliance.	•	WARNING: ANY CHANGE TO THIS HEATER OR ITS
• Do not place clothing or other flammable material on or	•	WARNING: ANY CHANGE TO THIS HEATER OR ITS
• Do not place clothing or other flammable material on or		CONTROLS CAN BE DANGEROUS.
near the appliance.		CONTROLS CAN BE DANGEROUS.
near the appliance.

• Due to high surface temperatures, keep children, clothing

Any safety screen or guard removed for servicing an

and furniture away.

appliance must be replaced prior to operating the heater.

• WARNING: Failure to keep the primary air opening(s) of

• WARNING: Do not use a blower insert, heat exchanger insert or other accessory not approved for use with

the burner(s) clean may result in sooting and property

heater.

damage.

WARNING

	When used without adequate combustion and ventilation
			CARBON MONOXIDE POISONING MAY LEAD TO
	air, heater may give off CARBON MONOXIDE, an odor-
			DEATH.
	less, poisonous gas.

			Early signs of carbon monoxide poisoning resemble the flu,
	Do not install heater until all necessary provisions are
			with headache, dizziness and/or nausea. If you have these
	made for combustion and ventilation air. Consult the
			signs, heater may not be working properly. Get fresh air at
	written instructions provided with the heater for infor-
			once! Have heater serviced.
	mation concerning combustion and ventilation air. In
			Some people — pregnant women, persons with heart or lung
	the absence of instructions, refer to the National Fuel
			disease, anemia, those under the influence of alcohol , those
	Gas Code, ANSI Z223.1, Section 5.3 or applicable local
			at high altitudes — are more affected by carbon monoxide
	codes.
			than others.
	This heater is equipped with a PILOT LIGHT SAFETY
			The pilot light safety system senses the depletion of oxygen
	SYSTEM designed to turn off the heater if not enough fresh		at its location. If this heater is installed in a structure having
	air is available.		a high vertical dimension, the possibility exists that the
			oxygen supply at the higher levels will be less than that at the
	DO NOT TAMPER WITH PILOT LIGHT SAFETY
			heater. In this type of application, a fan to circulate the
	SYSTEM!
			structure air will minimize this effect. The use of this fan will

	If heater shuts off, do not relight until you provide fresh air.		also improve the comfort level in the structure. When a fan
	If heater keeps shutting off, have it serviced. Keep burner		is used to circulate air, it should be located so that the air flow
			is not directed at the burner.
	and control compartment clean.

16012-1-0504

Page 3

BF-30-2, BF-20-2, BF-10-2 specifications

Empire Products has established itself as a notable player in the realm of industrial solutions with its comprehensive range of BF series products, particularly the BF-30-2, BF-10-2, and BF-20-2. These models, each designed to meet various operational needs, exhibit the company’s commitment to innovation and efficiency.

The BF-30-2 is the flagship model in the series, equipped with advanced features that cater to heavy-duty applications. It boasts a robust design coupled with high-performance capabilities. One of its standout technologies includes an efficient energy management system that optimizes power consumption without compromising performance. This model also features a user-friendly interface for easy operation and monitoring, ensuring that users can quickly adapt to its functionalities. The BF-30-2 is particularly well-suited for applications requiring precision and high throughput, making it a favorite among manufacturers looking for reliability and efficiency.

Next in the lineup is the BF-20-2, which strikes a balance between power and versatility. This model is designed to handle moderate to intense workloads, making it ideal for businesses that require adaptability in their operations. It is equipped with adaptive technology that allows it to adjust its performance based on real-time operational demands. The BF-20-2 also offers enhanced safety features, ensuring that operators can work confidently and comfortably.

The BF-10-2, while smaller in capacity, should not be underestimated. It is engineered for small to medium-sized tasks, perfect for businesses that require compact solutions without sacrificing quality. This model incorporates cutting-edge materials and components designed to maximize durability and reduce maintenance needs. Additionally, the BF-10-2 is highly energy-efficient, making it an excellent choice for environmentally conscious companies looking to minimize their carbon footprint.

All three models share a few key characteristics that highlight the essence of Empire Products' engineering prowess. They are designed for easy integration into existing systems, which simplifies upgrades for businesses looking to enhance their operational capabilities. Moreover, their modular design allows for customizable configurations, catering to specific user requirements.

In conclusion, the Empire Products BF series, encompassing the BF-30-2, BF-20-2, and BF-10-2, represents the synergy of performance, innovation, and versatility. Each model serves a unique purpose, allowing businesses to select the perfect equipment to meet their operational goals while benefiting from the latest technological advancements in the industry.