Bosch Appliances WFL 2060, WFL 2050 manual Installation, Connection, AndTransport, Risk Injury

Page 26

 

 

 

 

 

 

 

To

drain

the

pump refer to page￿20.

 

 

 

 

 

 

 

To

drain

the

water hose(s) refer to page￿22.

Installation,

 

 

 

 

 

 

Take

care

 

not to damage

the washing machine.

Connection

 

 

 

Do￿not hold onto protruding parts (e.g.￿loading

 

 

 

door)

when

lifting.

 

and￿Transport

 

 

 

In

addition

to

the safety information listed here, t

 

 

 

 

 

 

 

local￿water and electricity supplier may have specia

Safety

information

 

 

 

requirements.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If

in

any doubt, have the appliance connected by

￿

RISK

OF INJURY!

￿

 

 

an

authorized

technician.

 

 

 

 

whenFactory%supplied

equipment

The washing machine is heavy. Take

care

 

lifting￿it.

 

 

 

 

 

 

There

is a packet of accessory parts supplied w

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

your

washer.

Check to make sure that the

 

CAUTION

 

 

 

 

 

 

 

accessory parts supplied for your model are all

 

 

 

 

 

 

 

 

 

 

 

 

 

 

there. If any parts are missing, contact your deal

Frozen hoses can tear / burst. Do not install the

 

 

 

 

 

 

washing

machine

outdoors or in an

area prone immediately.

 

 

 

to frost.

 

 

 

 

 

 

Inside

the

 

drum:

 

 

 

 

 

 

 

 

 

 

Be sure to observe all listed warnings and cautions.

These installation instructions are intended for use by qualified installers. In addition to these instructions the washer shall be installed:

-In the United States, in accordance with the National Electric Code, ANSI/NFPA70￿~ latest edition/State and Municipal codes and/or local codes.

-In Canada, in accordance with the Canadian

Electric Code C22.1￿~ latest edition/State and

Municipal codes and/or local codes.

If the

washing machine is located in a room which

 

 

 

 

 

will be

exposed to

freezing

temperatures, or if it

is

 

 

 

 

 

located

in

a cabin

that is being shut down for

-

 

Water

supply hoses (cold

and hot

water).

the

 

 

 

 

 

winter,

any

residual

water in

the pump or water

i

let

dampness inside the drum is left over from

 

 

 

 

 

Any

 

hose(s)

must be drained.

 

testing which every washing

machine

is subjected

 

 

 

 

 

to

before

leaving the factory.

 

 

2￿

Image 26
Contents A a Iaa Page Contents Instructions Save These Protection Onservation IssuesEnvironmental Disposal InformationYour New Washing Machine Control panel Control lightsFirst Time About Your Washing Using For the First MachineTimeBefore Using For Aution Preparing Sorting Loading LaundryPreparing thelaundry Sorting the laundryWherever Loading the laundry Risk O ExplosionRisk of Poisoning Laundry DetergentsAndAdditives Basic Programs Extra cycle program selectorSpin Speed selector Additional Options Buttons On spinPage Bleaching Cancelling Active ProgramSoaking Changing DecolorizingWhen the Program has Ended Unloading thelaundryRisk of Explosion User Maintenance InstructionsRisk of Electric Shock Leaning the drain pump Risk of SaldingPage Cleaning Water Inlet Strainers Customer Service Descaling the washing machineTroubleshooting Minor Faults Use detergent recommended for high effi0 AndTransport InstallationConnection Risk InjuryPage Arning DimenionInallaion aea Builtin Installation Levelling Procedure Removing the transport bolts Insert the covers Hose Cable Lengths Water connectionOr Cold water connection only with Y!piece Electrical connection Grunding InstructinsTransport e.g.when moving Page 0901 am 5500 009