Connection options
A Cold water connectionand
B Hot water connection(max.140°F // 0°C)
min 10 mm
or Cold water connection only with Y!piece
min
10 mm
Water drainage
CAUTIN
Do not bend or pull the water drainage hose.
Height difference between the placement area ofwasher and the drainage point: Maximum110cm// 43inches.
Standpipe or In Wall Instalation
Use the U.bracket. Attach the U.bracket to th end of the hose and insert end of hose into standpipe or wall drain.
Use a | strap | or cable | tie connected to U.brac |
to hold hose in place. | |||
Drainage | into | a siphon |
|
Subsequent to connection:
Turn on the water taps completely, and check connection points for water.tightness.
CAUTIN
The connection points are under full water pressure. Check seal with tap fully open.
Secure the connection point with a hose band clip.
32