Transport e.g.when moving

WARNING

To reduce the

risk of fire

or electrical

shock,

Before transporting the

washing

machine:

DONOT use an extention

cord or an

adapter

Turn off the

water

tap,

connect the washer to the electrical power

supply.

Drain any residual water (refertopage20),

In the event that an earth+leakage

circuit breaker -is

Release the water pressure in the supply hose

tobe used, only use types marked with the

(referto

page

22),

following

symbol:7.

Disconnect the washing machine from the

Only this symbol can guarantee compliance with all

mains.

current

regulations.

Dismantle

the supply

and

drainage hose,

Do not

insert /

remove the

mains

plug

with wet or

damp hands.

Install the

lower 2

transport

bolts.

Handle

the plug

body only

when

removing the

Having transported the appliance and ensured

plug

from the socket.

properinstallation and connection, allow Drainthe

program to run through before starting the first

wash program.

Preparing

and

inserting

the

transport

bolts

Remove the 2 lower covers.

Prepare

the

transport

bolts:

Loosen

the

screw

in the sleeve until the end

the screw

level

with the end of the sleeve.

Insert and tighten transport bolts1 and2. The

lug on the washing machine

must be located

the groove

in the

rear panel

of the

housing.

Transport￿ e.g.￿when moving

Transport e.g.when moving