Bosch Appliances WFL 2050, WFL 2060 manual Builtin Installation Levelling Procedure

Page 29

	Builtin Installation			Levelling		procedure
	The appliance can be built/in; that	is,	you can	install			must	be	firmly on the gro
	the washing machine under/counter	in	akitchen	All	four appliance feet
				The	washing	machine	must	not	wobble.

cabinet opening.

a	590	mm	minimum		// 1/23"
					4
b	600	mm	minimum		// 5/23"
					8
c	850	mm	minimum		// 1/33"
					2
Minimum Installation					Clearances
			Alcove/Under			Closet
			Counter						Level the washing machine with the assistance of
									Level the washing machine with the assistance of
Sides			0"	(0	mm)	0"	(0	mm)	the	four adjustable feet and a spirit level:
Top			0"	(0	mm)	0"	(0	mm)		Loosen the counter/nut1 using the wrench.
Rear			0"	(0	mm)	0"	(0	mm)		Adjust the height by means of turning the
Front			0"	(0	mm)	0"	(0	mm)		appliance foot2.
Front			0"	(0	mm)	0"	(0	mm)

Tighten lock nut1 against the housing.

Note: Closet with dryer, please check the openings and ventilation requirement's for the used dryer.

29

Image 29

Contents A a Iaa Page Contents Instructions Save These Environmental Onservation IssuesProtection Disposal InformationYour New Washing Machine Control lights Control panelFirst Time About Your Washing Using For the First MachineTimeBefore Using For Preparing thelaundry Preparing Sorting Loading LaundryAution Sorting the laundryWherever Risk O Explosion Loading the laundryRisk of Poisoning Laundry DetergentsAndAdditives Extra cycle program selector Basic ProgramsOn spin Spin Speed selector Additional Options ButtonsPage Soaking Changing Cancelling Active ProgramBleaching DecolorizingUnloading thelaundry When the Program has EndedRisk of Explosion User Maintenance InstructionsRisk of Electric Shock Risk of Salding Leaning the drain pumpPage Cleaning Water Inlet Strainers Descaling the washing machine Customer ServiceTroubleshooting Minor Faults Use detergent recommended for high effi0 Connection InstallationAndTransport Risk InjuryPage Arning DimenionInallaion aea Builtin Installation Levelling Procedure Removing the transport bolts Insert the covers Water connection Hose Cable LengthsOr Cold water connection only with Y!piece Grunding Instructins Electrical connectionTransport e.g.when moving Page 0901 am 5500 009