Enerco HSBF10LP, MHBF6LP, HSBF20LPT installation instructions Blue Flame Heaters­ Plaque Heaters­

Page 1

Operational Instructions Only - No Parts List.

INSTALLATION Instructions

and Owner’s Manual

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater.

UNVENTED LP-GAS FIRED ROOM HEATER

Blue Flame Heaters­

 

Plaque Heaters­

 

 

Model #

Burn Rate

Model #

Burn Rate­

MHBF6LP

6,000 Btu/hr

MHIR10LP/HSIR10LP/TSIR10LP

10,000

Btu/hr­

MHBF10LP/HSBF10LP/TSBF10LP

10,000 Btu/hr­

MHIR20LP/HSIR20LPT/TSIR20LPT­

20,000

Btu/hr­

MHBF20LPT/HSBF20LPT/TSBF20LPT­

20,000 Btu/hr­

MHIRLPT/HSIR30LPT/TSIR30LPT­

30,000

Btu/hr

MHBF30LPT/HSBF30LPT/TSBF30LPT­

30,000 Btu/hr­

­

 

 

MHBF30LPT/

MHBF20LPT/

MHBF6LP

HSBF30LPT/

HSBF20LPT/

MHBF10LP/

TSBF30LPT

TSBF20LPT

HSBF10LP/

 

 

TSBF10LP

MHIR30LPT/

MHIR20LPT/

MHIR10LP/

HSIR30LPT/

HSIR20LPT/

HSIR10LP/

TSIR30LPT

TSIR20LPT

TSIR10LP

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life.­

-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

-WHAT TO DO IF YOU SMELL GAS

Shut off gas supply

Do not try to light any appliance

Do not touch an electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

-Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING: This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to Fresh Air for Combustion and Ventilation section on page 3 of this manual.­

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual for correct installation and operational procedures. For assistance or additional information consult a qualified installer, service agency, or gas supplier.­

1

 

ENERCO GROUP,nventedINC.,Liquid4560PropaneW. 160FiredTH ST.Room, CLEVELAND,Heater OHIO 44135Installation· 216Instructions-916-3000and Owner’s Manual

70575 Rev. F 04/08

Image 1
Contents MHBF30LPT MHBF20LPT MHBF6LP HSBF30LPT HSBF20LPT Blue Flame Heaters­ Plaque Heaters­TSBF30LPT TSBF20LPT HSBF10LP TSBF10LP MHIR30LPT MHIR20LPT HSIR30LPT HSIR20LPT HSIR10LP TSIR30LPT TSIR20LPT TSIR10LPCarbon Monoxide Poisoning PrecautionsPropane/LP Gas Thermostatic Control on Thermostat Models Safety DeviceLocal Codes Ignition SystemVentilation AIR Determining the Type of Heater Location SpaceVentilation from Inside Building This Installation Requires Installation Check GAS TypeVentilation from Outdoors Locating HeaterMounting Bracket Fastening Heater to WallInstalling Support Feet see figure Installing Bottom Mounting ScrewsConnecting to GAS Supply Placing Heater on Mounting BracketTest Pressure Equal To or Less Than ½ psig 3.5 kPa Test pressure in Excess of ½ psig 3.5kPaElectrical Wiring Diagram Pressure Testing Heater Gas ConnectionsOperating Your Heater What to do if YOU Smell GASLighting Instructions Shutting OFF Heater To Turn OFF GAS to ApplianceInspecting Burner Thermostat Control OperationPilot Flame Pattern Burner Flame PatternCleaning ODS/PILOT and Burner Cleaning and MaintenanceCleaning Burner Pilot AIR Hole Inlet Cleaning Heater CabinetObserved SYMPTOM­ Possible CAUSE­ REMEDY­ TroubleshootingObserved SYMPTOM­ Possible CAUSE­ REMEDY­ Troubleshooting CON’TIR10 LP­ SpecificationsIR20LPT­ IR30LPT­ BF6LP BF10LP­ BF20LPT BF30LPT­Unvented Liquid Propane Fired Room Heater Unvented Liquid Propane Fired Room Heater Unvented Liquid Propane Fired Room Heater Unvented Liquid Propane Fired Room Heater Unvented Liquid Propane Fired Room Heater Parts Under Warranty REPLACEMENT­PARTSParts not Under Warranty Technical ServiceUnvented Liquid Propane Fired Room Heater Model ­ Serial No. ­ Date Purchased ­ Warranty Information
Related manuals
Manual 24 pages 23.88 Kb

MHBF6LP, HSBF30LPT, HSIR20LPT, HSIR30LPT, HSBF20LPT specifications

The Enerco MHBF10LP, TSBF10LP, HSBF10LP, HSBF20LPT, and TSBF20LPT are innovative heating solutions designed for both commercial and residential applications. These units are highly efficient gas-fired heaters offering versatile heating capabilities, ensuring user comfort in various settings.

The MHBF10LP is a liquid propane heater featuring a powerful output of 10,000 BTU. It operates with a direct ignition system, allowing for quick and reliable startups. Its compact design makes it suitable for smaller spaces, while the adjustable heat settings empower users to customize their warmth. The MHBF10LP boasts a safety shut-off system which enhances the overall safety of the unit.

In contrast, the TSBF10LP is engineered for portability, offering the same 10,000 BTU output but with added mobility features. It comes with a built-in carrying handle and lightweight design, making it easy to transport from one location to another. Perfect for job sites or outdoor events, it features a sturdy construction that withstands demanding environments and a direct ignition system for ease of use.

The HSBF10LP, another variant in this range, offers high-efficiency heating in a small footprint. This model stands out with its integrated fan that aids in even heat distribution. Users can quickly warm up spaces without the long wait times. Additionally, it provides options for permanent installation, making it an adaptable choice for various applications.

The HSBF20LPT and TSBF20LPT models deliver enhanced power with a heating capacity of 20,000 BTU. The HSBF20LPT focuses on high efficiency and user convenience, featuring an automatic thermostat control to maintain desired temperatures without constant adjustment. Its robust design is perfect for larger areas, ensuring consistent warmth and comfort.

On the other hand, the TSBF20LPT is portable like its 10,000 BTU counterpart but with double the capacity. Its rugged construction and portability make it ideal for both indoor and outdoor use. The unit's reliability in diverse conditions is coupled with an ease of operation, providing warmth where it's most needed.

All models in this Enerco range prioritize user safety and efficiency. Featuring built-in safety mechanisms such as flame failure protection and tip-over shut-off systems, each heater ensures safe operation. Furthermore, the robust construction and high-quality materials used in these devices promise durability, making them a worthwhile investment for long-term heating needs.

Overall, Enerco's MHBF and TSBF series heaters represent a blend of modern technology, safety features, and user-friendly designs, tailored for a variety of heating applications.