Samsung SPD-2200 manual Sign

Page 4

Warning & Caution

Warning

Please read the instructions carefully for correct use of the product, and observe these cautions to prevent danger or physical damage while operating it.

Warning / Caution

The unit should be installed by trained

personnel.

Always stop using the product if it emits smoke

or becomes unusually hot.

ENGLISH

Warning

If you fail to read this information, or handle the product incorrectly, death or serious injury may result.

Installation by unskilled personnel without sufficient experience or expertise may result in fire or electric shock. Always ask your sales agent to perform installation.

Continuing to use it under such circumstances may result in fire.

Caution

If you fail to read this information, or handle the product incorrectly, serious injury or physical damage may result.

Never install the product in areas exposed to

 

Never install the product on a ceiling that Is not

water, oil or gas.

 

strong enough to bear its weight.

 

 

 

Sign

Not allowed.

No disassembly.

Be sure to keep this.

Doing so may result in malfunctions, electric shock or fire.

The product may fall.

Never disassemble the product or insert foreign

Never touch the power cord with wet hands.

bodies into it.

Touching the power cord with wet hands may result in electric shock. Malfunction may result.

6

SPEED DOME CAMERA

SPEED DOME CAMERA

7

 

 

 

 

Image 4
Contents Operation/Programming Model Description Speed Dome CameraContents Sign Main Features Extreme high or low temperatureConnector Cable Power SwitchRotary Switch 2 SW2 Rotary Switch 1 SW1Initial Setting Bracket Setup for InstallationGetting started Camera ID Switch Setting Factory Default Mainframe front panel Controller Model Setting Mainframe front panelRS-485 Terminal Setting Mainframe front panel Component DescriptionHow to Install Power adapter cableCable RS-485 Communication CableOptions related to installation Accessories optionWall Mounting STB-270PW How to Install the Camera using the Embedded Housing ⑧ Fasten the lock screwOSD Menu Configuration Camera settingMenu Configuration Dome Camera Users’Menu Settings ① AWB Mode ① AE ModeWhite Balance Exposure② D&N Mode Day & Night Mode Mode OFF③ Slow Shutter Back LightSequence Setting ① Set PresetFlickerless Flickerless Mode Sync④ Swing Focus Mode ③ Tilt Swing·AUTO/MANUAL ⑤ Group SEQ⑥ Tour ⑧ Power On Resume⑦ PTZ Trace T Setting ① Pan LimitON/OFF ② Tilt Limit④ Area Masking ⑥ Smart P/T⑤ Home position ⑦ Auto FlipOSD Setting ③ Preset Number④ Preset Name ① Camera IDAlarm Setting ① Alarm Enable② Alarm Input ⑤ Sequence Status③ Alarm Out ④ Motion Detection·OUT1 SET/OUT2 SET ·OUT1 TIME/OUT2 TimeInitialize Setting ① Power On Reset ② Factory Default Set③ Camera Default Set ④ Auto RefreshSystem configuration DimensionInstallation Method Ceiling attached Type InstallationSpecifications Ntsc PALPan Resolution Tilt ResolutionPreset Position Alarm