Samsung SPD-2200 manual How to Install, Power adapter cable, RS-485 Communication Cable

Page 11

How to Install

Cable

Preparation

For SPD-2200 installation, the cables listed below have to be prepared.

Power adapter cable

The cable to be connected to the power in the SPD-2200 terminal includes the power adapter, for which the rated voltage is AC24V, 2.5A as described below. (Use UL listed class 2 power source.)

● Video Cable

The cable connecting the SPD-2200 video out terminal and the monitor is the BNC cable as described below.

RS-485 Communication Cable

The cable connecting the controller for the SPD-2200s RS-485 communication is described below.

Note

·Adapter, Video and RS-485 communication cables not supplied.

Connection

1.First, connect one end of the BNC cable to the video out terminal.

2.Connect the other end of the BNC cable to the video in terminal of the monitor.

3.Connect one end of the power adapter, comprising two lines, to the Power In Terminal of the bracket using the flathead screwdriver as shown in the figure below.

4. Connect the power adapter plug to the power outlet.

5.Connect the connection terminal of the SPD-2200 controller to the external controller.

ENGLISH

Monitor In Terminal

Video Out Terminal

Monitor

Screwdriver

Power In Terminal

Power Adapter

Controller Connection

Terminal

Data Box

Controller

20

SPEED DOME CAMERA

SPEED DOME CAMERA

21

 

 

 

 

Image 11
Contents Operation/Programming Speed Dome Camera Model DescriptionContents Sign Extreme high or low temperature Main FeaturesRotary Switch 1 SW1 Connector CablePower Switch Rotary Switch 2 SW2Getting started Bracket Setup for InstallationInitial Setting Camera ID Switch Setting RS-485 Terminal Setting Mainframe front panel Controller Model Setting Mainframe front panelFactory Default Mainframe front panel Description ComponentRS-485 Communication Cable How to InstallPower adapter cable CableWall Mounting STB-270PW Accessories optionOptions related to installation ⑧ Fasten the lock screw How to Install the Camera using the Embedded HousingMenu Configuration Camera settingOSD Menu Configuration Dome Camera Users’Menu Settings Exposure ① AWB Mode① AE Mode White BalanceBack Light ② D&N Mode Day & Night ModeMode OFF ③ Slow ShutterSync Sequence Setting① Set Preset Flickerless Flickerless Mode⑤ Group SEQ ④ Swing Focus Mode③ Tilt Swing ·AUTO/MANUAL⑦ PTZ Trace ⑧ Power On Resume⑥ Tour ② Tilt Limit T Setting① Pan Limit ON/OFF⑦ Auto Flip ④ Area Masking⑥ Smart P/T ⑤ Home position① Camera ID OSD Setting③ Preset Number ④ Preset Name⑤ Sequence Status Alarm Setting① Alarm Enable ② Alarm Input·OUT1 TIME/OUT2 Time ③ Alarm Out④ Motion Detection ·OUT1 SET/OUT2 SET④ Auto Refresh Initialize Setting ① Power On Reset② Factory Default Set ③ Camera Default SetCeiling attached Type Installation System configurationDimension Installation MethodNtsc PAL SpecificationsAlarm Pan ResolutionTilt Resolution Preset Position