Samsung SPD-2200 manual Dome Camera Users’Menu Settings

Page 15

Camera setting

Dome Camera UsersMenu Settings

How to Use the OSD Menu

Check whether the camera is set to manual mode and press the OSD Menu Key, or 1 and the MENU Key at the same time.

The screen will then display the contents as shown below.

FOCUS

ENGLISH

The Focus menu sets the focus mode to either Auto or Manual Mode.

Focus Mode

·Auto : Automatically focuses by continuous monitoring in Auto Mode. Since the focus is automatically

adjusted when the Zoom key is controlled, Focus key input is not applied.

 

·Manual : The Manual mode enables the user to manually adjust the focus.

 

Main Menu

Main Menu

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

Initialize

Status

Move the cursor downwards to the submenu to set. Press the Enter key on the selected submenu. You can then change and set the submenu. Press the ESC KEY, and the OSD menu closes.

For more details, please see the Controller User Manual.

·One Shot AF : One Shot AF activates auto-focusing when the camera stops moving.

When the camera stops, it works as in Manual Mode.

Digital Zoom

Changes the digital Zoom factors.

We recommend setting the digital zoom factor before presetting.

Cautions

1) Camera Setting

Select Camera Setting in the Main Menu Window, and the Camera Setting Menu appears.

Digital Zoom

·The higher the digital zoom factor, the lower the image quality.

Auto-focus

·The Auto-Focus may not work properly under the conditions below.

Camera Setting Menu

Camera Setting

Focus

White Balance

Exposure

Back Light OFF

Sync

Brightness 050

Flickerless OFF

Others

Press the Enter key

Focus

Focus Mode One Shot Af

Digital Zoom 4X

-If the illumination in a monitoring zone is low

-If the Slow-Shutter is activated

-If the amplification degree is increased

-If the illumination in a monitoring zone is excessively high

-If both remote objects and close objects are included in a monitoring zone

-If there is no contrast (black and white), such as the sky or a wall, within the picture

-If there is a thin horizontal line within an image

28

SPEED DOME CAMERA

SPEED DOME CAMERA

29

 

 

 

 

Image 15
Contents Operation/Programming Speed Dome Camera Model DescriptionContents Sign Extreme high or low temperature Main FeaturesRotary Switch 1 SW1 Connector CablePower Switch Rotary Switch 2 SW2Bracket Setup for Installation Initial SettingGetting started Camera ID Switch Setting Controller Model Setting Mainframe front panel Factory Default Mainframe front panelRS-485 Terminal Setting Mainframe front panel Description ComponentRS-485 Communication Cable How to InstallPower adapter cable CableAccessories option Options related to installationWall Mounting STB-270PW ⑧ Fasten the lock screw How to Install the Camera using the Embedded HousingCamera setting OSD Menu ConfigurationMenu Configuration Dome Camera Users’Menu Settings Exposure ① AWB Mode① AE Mode White BalanceBack Light ② D&N Mode Day & Night ModeMode OFF ③ Slow ShutterSync Sequence Setting① Set Preset Flickerless Flickerless Mode⑤ Group SEQ ④ Swing Focus Mode③ Tilt Swing ·AUTO/MANUAL⑧ Power On Resume ⑥ Tour⑦ PTZ Trace ② Tilt Limit T Setting① Pan Limit ON/OFF⑦ Auto Flip ④ Area Masking⑥ Smart P/T ⑤ Home position① Camera ID OSD Setting③ Preset Number ④ Preset Name⑤ Sequence Status Alarm Setting① Alarm Enable ② Alarm Input·OUT1 TIME/OUT2 Time ③ Alarm Out④ Motion Detection ·OUT1 SET/OUT2 SET④ Auto Refresh Initialize Setting ① Power On Reset② Factory Default Set ③ Camera Default SetCeiling attached Type Installation System configurationDimension Installation MethodNtsc PAL SpecificationsAlarm Pan ResolutionTilt Resolution Preset Position