Karcher KMR 1250 D manual Shutting the sweeper down for longer periods, Overcoming obstacles

Page 14

English

User Instructions

KMR 1250 D

Shutting the sweeper down for longer periods

Picking up larger items (sticks, tins, etc.)

!Caution!

When the bulk waste flap is open, stones or grit could be thrown at the front by the main brush. Make sure therefore that when you open the flap no persons, animals or property are endangered.

nOpen the bulk waste flap by pulling back the corre- sponding lever.

nDrive over the items to be picked up, at low speed and with the bulk waste flap open.

Note:

In order to avoid stirring up dust unnecessarily, close the bulk waste flap again as soon as possible.

Overcoming obstacles

Obstacles up to 5 cm in height

–can be driven over without any problems. Before you do so, open the bulk waste flap and raise the main brush.

Obstacles more than 5 cm in height

– can be only be driven over with the aid of a suitable ramp.

If you do not intend to use the sweeper for a longer period of time (e.g. during the winter), please observe the following.

nIt is most important that the main brush and side brush(es) are kept raised in order to avoid damage to the bristles.

nClean the interior and exterior of the sweeper.

nClose the fuel tap.

nChange the engine oil (see Chapter: “Maintenance”).

nStore the sweeper in a protected environment and ensure that it cannot roll away.

nRemove the ignition key.

nDisconnect the battery.

nCharge the battery with a suitable charger approx. every two months (see Chapter: “Maintenance”).

38

Page 13 Page 15
Image 14
Page 13 Page 15
Contents KMR 1250 D Ïäçãßåò ÷åéñéóìïý ãéá ôïõò ÷ñÞóôåò Contents User InstructionsFire hazard while sweeper is operating For your safetyExplosion hazard while refuelling On behalf of the environment Intended usage Sweeper functions Main componentsEnglish Prior to initial start-upKMR 1250 D Pushing the sweeper by handOperating controls Filling the fuel tank Explosion hazard while refuelling Adjusting the driver’s seatPreparing the sweeper for use Open fuel tapMoving off and sweeping Starting the sweeperInitial driving trials Automatic cleaning Cleaning the filterStopping the sweeper and switching off Manual cleaningRisk of sweeper toppling over Emptying the waste hopperImportant information Injury hazard Lower the hopper 1 +Sweeping on damp or wet ground Typical applicationsSweeping on dry ground Overcoming obstacles Shutting the sweeper down for longer periodsPicking up larger items sticks, tins, etc Cleaning and care Transporting the sweeperMaintenance intervals MaintenanceDaily maintenance First engine oil changeMaintenance tasks Checking tyre pressures Checking the oil level Filling up with oil Changing the engine oilChecking the hydraulic system Clean fuel filterCleaning or replacing the air cleaner Safety information Replacing the side brush Replace light unitReplacing the sealing skirts Adjusting the sweeping pattern Replacing the main brush roller Replacing fuses Replacing the dust filtersTroubleshooting Technical specifications Hydraulic FluidKMR 1250 D Karcher KONFORMITÄTSERKLÄRUNG-EG Ionella

KMR 1250 D specifications

The Karcher KMR 1250 D is a cutting-edge, multifunctional cleaning machine that has become a key player in the realms of industrial and commercial cleaning. This versatile model combines powerful performance with innovative technology, designed to tackle a variety of cleaning tasks efficiently and effectively. Whether it's large outdoor areas, warehouses, or manufacturing facilities, the KMR 1250 D is built to deliver exceptional results.

One of the standout features of the Karcher KMR 1250 D is its robust design. The machine is equipped with a powerful diesel engine that ensures high performance while maintaining energy efficiency. This engine allows the KMR 1250 D to operate in tough conditions and provides the reliability that users expect from Karcher. Its mechanical prowess is complemented by an advanced hydrostatic drive system that allows for smooth acceleration and deceleration, enhancing overall maneuverability.

The KMR 1250 D showcases Karcher's commitment to cutting-edge cleaning technology. It features a sophisticated integrated water recycling system, which helps minimize water usage and enables longer operation times without frequent refills. The integrated traction control system ensures optimal grip on various surfaces, allowing the machine to navigate through slippery or uneven terrains effortlessly.

Additionally, the KMR 1250 D boasts an adjustable cleaning width, enabling users to customize the machine to suit specific cleaning areas. Users can choose between various attachment options, including sweeping and scrubbing heads, ensuring adaptability to different cleaning tasks. This modularity makes it an ideal choice for a wide range of environments, from large parking lots to production floors.

Safety is a priority with the KMR 1250 D, featuring multiple safety mechanisms to protect both the operator and the machine. The ergonomic design ensures that operators can maintain comfort during extended use, contributing to higher productivity levels.

In summary, the Karcher KMR 1250 D is a versatile cleaning machine equipped with powerful diesel technology, an efficient water recycling system, and adjustable cleaning capabilities. Its robust design, coupled with innovative features, ensures that it performs exceptionally well in various environments while prioritizing operator comfort and safety. Whether addressing large cleaning tasks or maintaining industrial spaces, the Karcher KMR 1250 D stands out as a reliable and efficient solution.
Top Page Image Contents