Controlling
7-3
5975348 BARCOVISION 8200 280497

Brightness Control

A correct

'brightness'

setting is important for good image reproduc-
tion.
Use the + button for a higher brightness.
Use the - button for a lower brightness.

Contrast Control

A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting
conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.

Color Saturation

Color saturation is only active for Video and S-Video. Adjust the color
intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.

Tint Control

Tint is only active for Video and S-Video when using the NTSC 4.43
or NTSC 3.58 system.
Use the + button
Use the - button.

Sharpness Control.

Use the + button for a sharper picture.
Use the - button for a softer picture.

Phase Control

Use the control stick to adjust the phase.
How to get source information?
The projector can give information about its input configuration
(inserted modules and 800 peripherals connection) in a menu box.
To get this information, call the

Main

menu by pressing the ENTER
key.
Highlight
System Settings
by pushing the control disk up or down and
press ENTER to select this option. The System Settings menu will
be displayed on the screen.
Highlight

Input Slots

by pushing the control disk up or down and press
ENTER to select.
The projector's controller will scan the input slots and displays the
result in the

Input Slots

menu.
Next to the digits you find the name of input slots. The controller starts
counting from left to right when you are in front of the projector and
looking to the lens.
If a RCVDS (switched on) or VS05 is connected to the projector, it will
be also indicated on the menu by adding

+ 800 peripheral

. If no 800
peripheral indication is made on the menu, there are still two possi-
bilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots
are not accessible with the up or down arrow key to toggle their
function.
If an input slot is empty, the indication

no module

is added next to the
corresponding slot number in the

input slots

menu.
EXIT : returns to the System Settings menu.
MAIN MENU
832b
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
Lamp Control : 1500W
Installation
Input slots
Summary
Color
INPUT SLOTS
1. RGB-SS [CV]
2. RGB-SOG
3. Video/S-Video [Video]
4. Component video-SS
+ 800-peripheral
•
837