Picture Control in Adjustment Mode
9-7
5975348 BARCOVISION 8200 210497
Configure
The configure menu contains two toggle functions :

geometry

and

conversion

.
Use the control disk to select

Configure

and press ENTER.
SCREEN OPERATIONS
868b
Zoom/Pan
Geometry (off)
Configure
Conversion [On]
Geometry [Off]
874
CONFIGURE
Conversion
All incoming signals are internally converted to be displayed at its
maximum possible dimensions. When conversion is [off], the real
input signal is displayed on the screen. Parts of the image cannot be
displayed and will be lost.
When conversion is [off], the geometry function is disabled.
Geometry
The Geometry function can only be activated when conversion is
[on].
Use the Geometry adjustment to align the image if the projector is
mounted under a non standard projection angle.
If the Geometry function has to be adjusted, toggle Geometry to [On]
with the ENTER key and press EXIT to return to the

Screen Opera-

tions

menu (previous menu).
Conversion [On]
Geometry [Off]
874
CONFIGURE
SCREEN OPERATIONS
868c
Zoom/Pan
Geometry
Configure
875
Highlight

Geometry

and press ENTER to select. The geometry menu
will be displayed.