Picture Control in Adjustment Mode
Screen operations
Select the Picture Control menu on the Main menu by pushing the control disk up or down. Press ENTER to select.
Push the control disk up or down to select Screen operations. Press ENTER to select.
When pushing continuously on the control disk, the adjustment will be executed in an accelerated fashion.
Zoom/pan
Push the control disk up or down to highlight Zoom/Pan and press ENTER to select.
All functions, e.g. move, enlarge, reduce, stretch, can be done on a "Window" or on a "Picture".
MAIN MENU
Picture Control 
System Settings
File service
Service Mode
PICTURE CONTROL
Signal operation
Screen operation
SCREEN OPERATIONS
Zoom/Pan
Geometry (off)
Configure
867
SCREEN OPERATIONS |
Zoom/Pan |
Geometry (off) |
Configure |
868a |
Window
A window determines the maximum area used on the screen to project a picture.
This window can be placed in any position on the screen using the move, reduce and stretch controls. During a first start up, the window will be on its maximum dimensions. Enlarging and moving is not possible in this maximum position.
Use the following controls to create a desired window on the screen. With these functions, all aspect ratios are possible.
Select the controls by pushing the control disk to the right or to the left and press ENTER to activate the control.
Screen |
Window |
Picture |
870 |
[window]
moves the window to the left.
[window]
moves the window to the right.
5975348 BARCOVISION 8200 210497
870 | 870 |
870 | 870 |
