Barco R9001280 owner manual Component input module, Component input selection

Connections

Push the control disk key up or down to select System Settings and press ENTER.

Use the control disk to select Input Slots by pushing up or down and press ENTER. The internal system will scan the inputs and displays the result in the Input Slots menu.

Push the control disk up or down to select the corresponding RGB input slot. To change the sync priority for Sync separate, press ENTER key to toggle between CV and CS or HS&VS.

Possible indication :

RGB-SS [CV] = separate sync is composite video signal on H/C input.

RGB-SS [CS or HS&VS] = separate sync is composite sync or horizontal and vertical sync.

RGB-SOG= sync on green.

MAIN MENU

Picture Control

Audio Control

System Settings

File service

SYSTEM SETTINGS

Lamp Control

Installation

•Input slots

Summary

INPUT SLOTS

1. RGB-SS [CV] 2. RGB-SOG

3. Video/S-Video [Video]

•

4. Component video-SS + 800-peripheral

837

Component input module.

Connect your component signals (Y-luma, R-Y and B-Y), e.g. a professional VCR to the Component input module.

Component video : 4 x BNC R-Y : 0.7 Vpp ± 3 dB B-Y : 0.7 Vpp ± 3 dB

Y : 0.7 Vpp ± 3 dB

1 Vpp ± 3 dB if Tri-level sync on green Composite sync : 1 Vpp to 4 Vpp ± 3 dB

All input signals are always 75 ohm terminated, even if the module is "not selected".

On

COMPONENT VIDEO INPUT

Sync

Blue - luma

Luma

Red - luma

GREEN - OPERATION	DIAGNOSTICS
	CODE	IR-RECEIVER
	IR-ACKNOWLEDGED

RS232 OUT RS 232 IN REMOTE

IR-RECEIVED

Component input selection :

Key in the corresponding slot number on the RCU or the local keypad.

Indication on the input slot menu : Professional VCR

Component Video-SS = Component video with separate sync

Component Video-SOY = Component video with sync on Y

Component Video-3LSS = Component video with 3 level separate sync

Component Video-3LSOY = Component video with 3 level sync on Y

5975348 BARCOVISION 8200 280497 6-5