Connections
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the
On
On
Audio input not |
|
Video input |
Separate
Super
DIAGNOSTICS
| RS232 OUT | RS 232 IN |
1 x 4 pins plug (mini DIN) |
| |
pin configuration : | ||
| ||
1 | ground luminance |
|
2 | ground chrominance |
|
3 | luminance 1.0 Vpp ± 3 dB |
|
4 | chrominance 282 mVpp ± 3 dB |
|
Input selection : | Luma/Chroma |
Key in the corresponding slot number on the RCU or the local keypad. Depending on the priority setting in the Input slots menu, Video or
VCR
TV tuner, e.g.
TVDM 40 stereo
VCR
Composite
Video
Audio amplifier
Push the control disk up or down to highlight System settings and press ENTER to display the 'System Settings menu'.
EXIT returns to operational mode.
Use the control disk to select 'Input Slots' by pushing it up or down and press ENTER. The internal system will scan the inputs and displays the result in the 'Input Slots menu'.
Push the control disk up or down to select the corresponding (video or
To change the priority between Video and
J13 | J12 | J11 |
Floating
MAIN MENU
Picture Control
Audio Control
System Settings
File service
SYSTEM
SETTINGS
Lamp Control
Installation
•Input slots
Summary
INPUT SLOTS
1. 
2. 
3.
•
4. Component
837
Straps on module level.
Floating or
Video input :
J11 : strap "yes" : non floating strap "no" : floating
J12 : strap "yes" : non floating strap "no" : floating
J13 : strap "yes" : non floating strap "no" : floating
Factory preset : strap on, input non floating.
Floating or non floating input
5975348 BARCOVISION 8200 280497 |
| |
|
