Picture Control in Adjustment Mode

9

PICTURE CONTROL IN ADJUSTMENT MODE

 

The picture control menu is split up in two parts :

Signal operations and

Screen operations.

Signal operations : to manipulate the video signal, e.g. sync slow/fast, color balance adjustment etc.

Screen operations : to manipulate the projection window and the picture, e.g. shift, stretch, enlarge and reduce.

Signal operations.

Select first the Picture Control menu on the Main menu by pushing the control disk up or down.

Press ENTER to select.

Push the control disk up or down to select Signal Operations.

The default setting for all items are shown in the menu next to this text. To change a value in the Signal Operation menu, select first the item by pushing the control disk up or down and follow then one of the two following methods :

a. direct access, with the numeric keys on the RCU or local keypad. b. scrolling by pushing the control disk to the right or to the left until the desired value (image quality) is obtained.

MAIN MENU

 

Picture Control

 

System Settings

 

PICTURE CONTROL

 

Signal operation

 

Screen operation

 

SIGNAL OPERATIONS

Video offset

128

Gain

 

Gain red

160

Gain green

160

Gain blue

160

Gamma

1.0

Smoothness

4

Still Video

[Off]

Sync

[Slow]

Color balance

 

 

859

Video offset

Default value : 128

To adjust the Video offset, be sure the contrast level is adjusted to "48" (brightness setting has no influence) and the color saturation is set to zero (for video). When possible use a grey scale test pattern. Adjust until the second last bar (dark grey) is distinguishable from the last bar (black).

Gain

Default value : 160

To adjust the Gain, be sure the contrast level is adjusted to "48". When possible use a grey scale test pattern. Adjust until the first white bar is distinguishable from the second white bar.

5975348 BARCOVISION 8200 210497

861

861

9-1

Page 37
Image 37
Barco R9001280 owner manual Signal operations, Video offset, Gain