Manuals / Omega Speaker Systems / Computer Equipment / Switch

Omega Speaker Systems RD8300 manual Turning the unit off, Email on Alarm Event, System Setup

Models: RD8300

1 114
Download 114 pages 38.4 Kb
Page 41
Image 41

Section 4 – Functional Description

The following conditions for record on alarm must be met for a recording to start.

Record Setup

Digital Input Setup

Record Mode

Digital Input

External Trigger

Digital Input set to

The Record

The specified

checkbox is checked

Record and enabled

ARM button has

digital input must

The trigger source is

(Must be same input

been pressed

be activated

 

 

selected

as selected in

 

 

 

Record Setup)

 

 

 

 

 

 

When the external event is active the unit will start recording. It will continue to record for a minimum of 30 seconds or until the external event is removed.

4.10.3 Email on Alarm Event

The recorder can be set up to send an email on an alarm event. Any alarm can be programmed to Notify a recipient of the event. The email will be sent to the default address entered into the System Setup Menu. It is also necessary to set up the smtp information in the System Menu. Finally, in the Alarm Setup menu the channel must be enabled along with the Notify Enable and the Master enable.

Always make sure the email is functional by manually sending an email otherwise if the alarm triggers an email which cannot be sent, the recorder will try then simply discard it.

The following conditions for email on Alarm event must be met for an email to be sent.

System Setup

SMTP email

information has been

setup

There must be a

functional Ethernet

connection

Alarm Setup

Notify is checked

Alarm Enable is

checked

Alarm Master Setup

Channel Enable checked

Master Enable checked

Notify Enable checked

Alarm

The specified

alarm must be in an alarm condition

4.11 Turning the unit off

When power is removed from the unit it does not turn off immediately. There is a battery backup in the power supply that runs the unit for a couple of minutes to ensure that all systems shut down properly and all data files are closed and secured. Once the recorder senses the power has been removed it shuts off the display and blinks the LED status indicator on the lower right of the front panel, to show that it is in the battery backup mode. It waits approximately 30 seconds to ensure that the power failure is not intermittent or simply a brown out, then commences the shut down procedure. If power should return during this period then the recorder resumes operation normally. When the recorder completes the shutdown process, it turns the battery off and the unit is OFF.

There are a few cautionary measures that need to be taken:

1.Ensure that the backup battery switch on the rear panel is in the ON position when using the unit and

DO NOT USE THIS SWITCH TO TURN OFF THE UNIT.

2.If the unit has been off for a lengthy period, the battery may require up to 72 hours to fully charge.

3.If you RESET the unit using the button recessed behind the media door, you may lose data if you do not STOP RECORDING and SAVE THE CONFIGURATION FILE.

Page 32

09/11/2008 REV 0.99

Page 40 Page 42
Page 41
Image 41
Omega Speaker Systems RD8300 Turning the unit off, Email on Alarm Event, Record Setup Digital Input Setup Record Mode
Page 40 Page 42

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.