Omega Speaker Systems RD8300 manual User Login, Display Utilities, Display Brightness

Section 4 – Functional Description

4.7User Login

If password protection is enabled, the user will have to log in to be able to use many of the functions of the recorder. There are various levels of protection and access to functions is based on user privileges. These levels are:

User: Can operate the recorder but cannot change any settings or configuration. Manager: Can operate and configure the unit, but cannot change basic settings.

Administrator: Can operate the unit, and change all configurations and settings.

If password protection is NOT enabled then all users have administrative privileges. Log in is done via the System Utility Menu using the log in icon shown right. This will bring up the login dialog box shown below right.

Note: If a user is not logged in and attempts to access a protected function, this log in dialog box will pop up at each instance. Logging in allows a user to navigate the unit without having to deal with this at each attempt to do anything. Once logged in a user remains logged in until they log out or their log in time expires, however they will be required to enter their password.

Enter the User ID and Password using the keyboard and tap OK (Check mark). Check the “Change Password” box if you wish to change your password.

To Log Out tap the Log In icon and you will be asked if you want to log out. Tap the Yes button.

Logging in or out is recorded in the Activity Log.

Figure 4-7 Log In

4.8Display Utilities

The Display Utility menu allows the user to control the display brightness and background color. Enter this dialog by tapping the icon shown left, in the System Utility Menu.

4.8.1 Display Brightness

The display brightness can be set at varying levels, either continuously or can be set to dim after a preset time. Refer to 3-11. There are two sliders – Dim Level and Normal Level.

The Dim Level is the level the display will dim to after the Time Out, which is selected in the dropdown box to the left of the Dim Level slider bar. It is shown as 2 minutes in Figure 4-8. In order for the Dim Level Time Out to be active you need to check the Enable box. To set the Dim Level place the stylus on the slider bar and drag the pointer or tap the slider bar. The display brightness will alter in real time. Select the required level.

The Normal Level setting will be the default brightness of

the display. To change the brightness, place the stylus onFigure 4-8 Display Setup the slider bar and drag the pointer or tap the slider bar. The

display brightness will alter in real time. Select the required level.

After the preset period of inactivity, the display will dim to the Dim Level setting. Any screen touch activity will restore the normal level of brightness.

Page 30

09/11/2008 REV 0.99