Manuals / Omega Speaker Systems / Computer Equipment / Switch

Omega Speaker Systems RD8300 manual Panel Mounting, Front Panel Cut Out

Models: RD8300

1 114
Download 114 pages 38.4 Kb
Page 24
Image 24

Section 3 – Installation

3.3.1 Panel Mounting

The recorder should be mounted in a vertical panel to ensure proper operation. Note that the locking bars can be used on the sides or top and bottom of the unit depending on available space. Ensure you have the proper clearances and proceed as follows:

3.3.1.1Cut a panel opening 5.43” x 5.43” [138 mm x 138 mm]. Units can be mounted as close as 0.6”

[15.2mm] between opening cutouts

Figure 3-2 Front Panel Cut Out

3.3.1.2Remove any packaging material from the recorder. Always handle the unit carefully to avoid damaging the LCD display or scratching the display surface.

3.3.1.3Remove the locking bars from the recorder enclosure and ensure the gasket is not twisted on the enclosure.

3.3.1.4Insert the recorder rear end first, into the panel opening from the front of the panel as shown in Figure 3-3.Ensure that the gasket is between the front bezel of the recorder and the front panel.

3.3.1.5With the recorder held firmly in place against the panel, install one of the locking bar assemblies by sliding the locking bar notch into the slot on the side (or top) of the recorder enclosure as shown in Figure 3-4.

3.3.1.6Using a slotted screwdriver, tighten the screw until the locking bar is just pressing against the panel.

3.3.1.7Install the other locking bar assembly into the slot on the opposite side (or bottom) of the recorder enclosure and tighten as before.

3.3.1.8Using the screwdriver, tighten both screws so that the recorder is held firmly in place. Do not over tighten.

3.3.1.9Use the supplied silver “stickers” to seal the unused locking bar slots on the top and bottom or sides of the unit

Page 15

09/11/2008 REV 0.99

Page 23 Page 25
Page 24
Image 24
Omega Speaker Systems RD8300 manual Panel Mounting, Front Panel Cut Out
Page 23 Page 25

RD8300 specifications

The Omega Speaker Systems RD8300 is a remarkable entry in the audio equipment market, designed for audiophiles and casual listeners alike who seek high-quality sound reproduction. This speaker system combines cutting-edge technologies with user-friendly features to deliver an immersive listening experience.

One of the standout characteristics of the RD8300 is its advanced driver configuration. Featuring a dual 8-inch woofers, a precision-tuned midrange driver, and a high-frequency tweeter, the RD8300 is engineered to provide a full range of frequencies with unparalleled clarity. This configuration ensures that bass notes are deep and powerful, while mid-range and treble sounds are crisp and detailed, making it suitable for a wide variety of music genres and audio formats.

Another integral technology in the RD8300 is its sophisticated crossover network. By intelligently directing frequencies to the appropriate drivers, the crossover helps to minimize distortion and enhance the overall sonic coherence of the speaker. This ensures every note is delivered with precision, allowing listeners to appreciate the nuances in their favorite tracks.

The RD8300 also boasts an impressive power handling capability, allowing it to deliver loud and dynamic sound without compromising audio quality. Its robust construction ensures minimal resonance, further enhancing sound clarity. The speaker's enclosure is crafted from high-density fiberboard, designed to reduce unwanted vibrations while maximizing audio performance.

In terms of connectivity, the RD8300 is versatile. It comes equipped with standard binding post inputs, making it compatible with a wide range of audio equipment. Additionally, it features both wired and wireless connectivity options, catering to modern listening preferences.

User convenience is another focus of the RD8300's design, with features such as adjustable feet and a user-friendly interface that allows for easy setup and adjustment. The sleek visual design of the speaker adds an aesthetic touch, making it an attractive addition to any room.

In summary, the Omega Speaker Systems RD8300 stands out as an exceptional speaker choice. With its advanced driver design, sophisticated crossover technology, impressive power handling, versatile connectivity options, and user-friendly features, it caters to those seeking a superior audio experience, making it a must-have for audio enthusiasts.