Service Mode

Modify password

To change your password, highlight 'Modify password' and press ENTER to start up the password modification procedure.

Enter your old password with the digit keys. After the fourth digit is entered, the next modify password menu is displayed.

Your new password will be asked if your old password is correct. Enter your new password with the digit keys. After the fourth digit, the projector will ask to re-enter your new password.

Re-enter your new password.

When the password is correct, the message "Password modified" will be displayed for a certain time and then the projector returns to the Service menu.

When the password is not correct, an error message "Invalid pass- word" will be displayed. Press EXIT to continue. The projector returns to the Service menu without changing the password.

Lamp Run Time History

To get an overview of the different lamp run times, highlight Lamp Run time History and press ENTER. A listing with the lamp serial number and the corresponding run time will be displayed.

Reset Lamp Run Time.

Highlight Reset Lamp Run Time and press ENTER to select.

5975348 BARCOVISION 8200 210497

MODIFY PASSWORD

Enter Old Password : ----

MODIFY PASSWORD

Enter New Password : ----

MODIFY PASSWORD

Re-enter New Password : ----

SERVICE MODE

 

Modify Password

 

Reset Lamp Run Time

 

Lamp Run Time History

 

Convergence

 

Display Settings

 

Decoder Settings

 

Color

 

I2C

 

LAMP RUN TIME HISTORY

> SN1425634

75 h

SN1234567

1000 h

SN0000000

0 h

SN0000000

0 h

SN0000000

0 h

SN0000000

0 h

SERVICE MODE

Modify Password

Reset Lamp Run Time

Lamp Run Time History

Convergence

Display Settings

Decoder Settings

Color Balance

I2C Device Test

878b

10-5

Page 49
Image 49
Barco R9001280 owner manual Modify password, Lamp Run Time History, Reset Lamp Run Time