Picture Control in Adjustment Mode
Gain adjustment per color
If the obtained color balance is not yet correct, adjust with the separate gain controls until the desired color balance is obtained.
Smoothness
The lower the smoothness value, the sharper the image. The influence of this setting is visible on high density image with small characters.
Still video [On/Off]
This function is only used for stationary interlaced images. Highlight Still Video by pushing the control stick forward or backward and press ENTER to toggle between ON and OFF.
Still Video [On] : the displayed image contains less jitter and gives a sharper image.
Still Video [Off] : for moving pictures.
Sync [Fast/Slow]
Highlight Sync by pushing the control disk up or down and press ENTER to toggle between Slow and Fast.
Note : Sync is normally used in the SLOW position. The FAST position is used to compensate for unsteady sync pulses from older video playback equipment.
Color Balance
Highlight Color Balance by pushing the control disk up or down and press ENTER to select the color balance selection menu.
The next choices are possible : 3200K
6500K
9500K Custom
Use the control disk to make your selection and press ENTER. A marker indicates the actual color balance setting.
When custom is selected, the blue and red color can be adjusted (range from 0 to 2.5) in comparison with the green color (value 1). Push the control disk up or down to select blue or red. Push the control disk to the left or to the right to adjust.
SIGNAL OPERATIONS
Video offset | 100 |
Gain |
|
Gain red | 200 |
Gain green | 200 |
Gain blue | 200 |
Gamma | 1.0 |
Smoothness | 4 |
Still Video | [Off] |
Sync | 3200 |
[Slow] | |
Color balance | 6500 |
| 9500 |
| Custom |
| 859 |
| Tc = custom |
| G |
R | 1.03 |
B | 1.01 |
| 5975348 BARCOVISION 8200 210497 | |
|
