Source Numbers 90 - 99
D SOURCE NUMBERS 90 - 99
Source numbers 90 - 99
These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 05 or VS05. An additional adjustment file can be created for these source numbers. This file can contain different settings. The relationship between sources 0 - 9 and 90 - 99 is shown in the diagram below.
source input 1 | source number 1 | file A | |
source number 91 | file A' | ||
| |||
source input 2 | source number 2 | file B | |
source number 92 | file B' | ||
| |||
source input 3 | source number 3 | file C | |
source number 93 | file C' | ||
| |||
source input 9 | source number 9 | file I | |
source number 99 | file I' | ||
|
Follow the steps below to create a second file for sources 0 to 9 :
1.Select the source between 0 and 9.
2.Select the corresponding source number between 90 and 99 with the digit keys on the RCU.
3.Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4.Save the file and exit the adjustment mode.
5975348 BARCOVISION 8200 210497 |
| |
|
