Error Messages
Current Share Error Codes
Current Share Error Codes
Table C.13Current Share Error Codes
Error | Error Message Description | |
code | ||
| ||
+1900 | Current Share General Error | |
|
| |
+1911 | Current share master already online | |
| A unit on the CANbus network has already been assigned the current share | |
| master unit. Only one is allowed per network. | |
+1912 | Current share slave lost | |
| One of the connected current share slaves have not responded in time. | |
+1921 | Current share master lost | |
| The assigned master has not responded in time. | |
|
| |
+1922 | Current share slave connection refused | |
| Connection as a slave on the current share network has been refused due to | |
| one of the following reasons: | |
| 4 slaves are already online, | |
| the voltage rating does not match those of the master’s, | |
| the current rating does not match those of the master’s. | |
|
| |
+1924 | Current share data out of range | |
| The voltage or current readback or setpoint values passed are out of range. | |
+1925 | Current share slave output off by unknown | |
| One of the slave’s output is off because of unknown reasons | |
+1926 | Current share slave output off by command | |
| One of the slave’s output is off because of a command from a remote source | |
| or the front panel. | |
+1927 | Current share slave output off by AC fail | |
| One of the slave’s output is off because of an AC fail condition. | |
|
| |
+1928 | Current share slave output off by OTP (Over Temperature Protection) | |
| One of the slave’s output is off because of an OTP condition. |
124 | Operating Manual for Multichannel Functionality |
