Xantrex Technology GPIB-M-XPD, GPIB-M-XHR, GPIB-M-XFR, GPIB-M-XT Expressions, Expression Details

Release 2.1

115

Expressions

Table B.15Expressions

Expression	Details
aux_line_mnemonic	Define the output of the auxiliary line.The possible values are NONE, ON, OFF, OVOLtage,
	UVOLtage, OCURrent, UCURrent, ACOFf, OTEMperature, SPRotection, UNRegulated, FOLD, CC,
	CV, CP.
channel	The address for a multichannel slave. An integer value in the range 2 to 50.
codeword	A string representing any 4-digit positive integer.
current	A numeric value as defined by SCPI. May also be MAXimum or MINimum. May include
	current-related suffix units such as “mA”, “uA”, “A” etc. Range may be 0 to 103% of model’s rated
	current.
delay	A length of time in the range 0 to 60 seconds. May include time-related suffix units such as “S”,
	“MIN”, “mS”, “uS” etc. By default, the value is in seconds.
ESE-word	Range 0–255. An 8-bit status mask for the Standard Event Status Register that determines which
	bits are OR’d to form the ESB bit in the Status Byte Register.
GPIB_address	The address for a GPIB controlled unit. An integer value in the range 1 to 30.
on-off-state	A Boolean indicator of a state. Possible values are ON, OFF, 0 (off), or 1 (on).
OVP_level	A numeric value as defined by SCPI. May also be MAXimum or MINimum. May include
	voltage-related suffix units such as “mV”, “uV”, “V”, etc. Range is 0 to 103% of model’s rated voltage.
setting_location	A numeric indication of an internal set of setting registers. An integer value in the range 1 to 10.
sequence_count	Number of times a sequence is to be repeated. Range is 1 to 9999.
sequence_number	The name of an auto sequence program. Range is 1 to 10. The suffix is part of the SEQUENCE
	command name and is not a parameter.
status-enable	A 16-bit status mask for any condition register that determines which bits are to be used for
	synthesizing the summary bit of that register.
step_number	The step number of an auto sequence program. Possibly considered a SCPI suffix. Range is 1 to
	99.
step_time	The duration of an auto sequence step in the format hh:mm:ss.s.
	May include time-related suffix units such as “S”, “MIN”, “mS”, “uS”, etc. By default, the value is in
	seconds.
voltage	A numeric value as defined by SCPI. May also be MAXimum or MINimum. May include
	voltage-related suffix units such as “mV”, “uV”, “V”, etc. Range is 0 to 103% of model’s rated voltage.

SCPI Command Reference

Expressions