Xantrex Technology GPIB-M-XHR, GPIB-M-XFR, GPIB-M-XT, GPIB-M-XPD manual Table B.12User Lines, 112

112

Operating Manual for Multichannel Functionality (GPIB-M)

Query the Standard Event	[:]STATus[<channel>]:STANdard[:EVENt]?	See Table 4.10, on page 78.	N/A
register (ESR?)
Enable the Standard	[:]STATus[<channel>]:STANdard:ENABle	See Table 4.10, on page 78.	Yes
Event register
(*ESE,*ESE?)
Query the Status Byte	[:]STATus[<channel>]:SBYTe[:EVENt]?	See Table 4.11, on page 79.	N/A
(*STB)
Service Request Enable	[:]STATus[<channel>]:SREQuest:ENABle <status-enable>	Set the bits in the Service Request Enable	Yes
(*SRE,*SRE?)		Register.

Table B.11Protection Commands

Function	SCPI Command	Description	Query
Set Over Temperature	[:]SENSe[<channel>]:TEMPerature:PROTection:LATCh	Select if output is latched off or auto	Yes
Response	<on-off-state>	recovers in the case of an over temperature
		condition
Query Over Temperature	[:]SENSe[<channel>]:TEMPerature:PROTection:TRIPped?	Query temperature protection tripped	N/A
Protection Tripped
Set AC Fail Response	[:]SENSe[<channel>]:VOLTage:AC:PROTection:LATCh	Select if output is latched off or auto	Yes
	<on-off-state>	recovers in the case of an AC Fail
Query AC Fail Protection	[:]SENSe[<channel>]:VOLTage:AC:PROTection:TRIPped?	Query AC protection circuit tripped	N/A
Tripped

Table B.12User Lines

Function	SCPI Command	Description	Query
Select polarity of Auxiliary	[:]OUTPut[<channel>]:AUXiliary<AB>:POLarity	Configure the polarity of the auxiliary line	Yes
Lines	{HIGHLOW}
Select Source of Auxiliary	[:]OUTPut[<channel>]:AUXiliary<AB>:SOURce	Configure the auxiliary line	Yes
Line State	<aux_line_mnemonic>
Query state of Auxiliary	[:]OUTPut[<channel>]:AUXiliary<AB>:STATe?	Query the state of the auxiliary line	N/A
Line

Table B.13Output State

Function	SCPI Command	Description	Query
Set Output State	[:]OUTPut[<channel>][:STATe] <on-off-state>	Enable/disable the power supply output.	Yes
Set Output State at	[:]OUTPut[<channel>]:PON:STATe <on-off-state>	Selects the state of the output at power-on	Yes
Power-On
Power-On Configuration	[:]OUTPut[<channel>]:PON:RECall	Configure the supply to recall last setting,	Yes
	{PRESetUSER<setting_location>SEQ<sequence_number>}	one of the user settings, factory preset
		values or to enable an auto sequence.

SCPI Command Reference

SCPI Command Summary