Honeywell 800-08091V3 manual How to Clear Bypassed Zones, How to Disarm the System, Security contd

		Security (cont'd)
ICON	ACTION	NOTES
	6. Press the BACK icon to return to the	The "More Choices" screen is displayed showing the system status as Ready-
	“Arming” screen.	Bypass.

How to Clear Bypassed Zones

A bypassed zone is automatically unbypassed when you disarm the system. If a zone is bypassed, you can remove the bypass as follows:

ICON				ACTION	NOTES
	1.			Press the SHOW ZONES icon.	While the keypad is requesting and receiving the zone data from the control
		2.		Press the CLEAR BYPASSES icon.	panel, the screen displays "Please Wait!". Then the zones, along with their
					current status, are displayed.
			3.	Enter your 4-digit user code. The "More
					Note: If the system is armed and you unbypass a zone, it disarms the
				Choices" screen is displayed showing the
				system as Ready to Arm.	system. If zones are still faulted (not ready) the system will indicate the
					status as “Not Ready Fault”.

How to Disarm the System

IMPORTANT: If you return to your home or business and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. If you return to your home or business after an alarm has occurred and the main sounder has shut itself off, the keypad beeps rapidly upon entering, indicating that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.

The system may be disarmed using either of two methods. One method is employed when you enter the premises and the other is when you have been in the premises with the system armed (i.e., Stay and Night arming modes).

To disarm the system when entering the premises:

The keypad automatically displays the Entry Delay Active screen when you enter the premises.

ICON	ACTION	NOTES
	1. Enter your 4-digit user code.	The partition is disarmed and the "Arming" screen is displayed showing the
		system as Ready to Arm.
		Note: If you have a commercial system and a time window has been defined
		for when you may disarm the system, the system does not disarm if you are
		outside that time window.

To disarm the system when already in the premises:

ICON	ACTION	NOTES
1.	Press the Disarm icon.
2.	Enter your 4-digit user code.

13