Honeywell 800-08091V3 manual Time/Date Setup, Setting Daylight Savings Time, User Setup contd

User Setup (cont'd)

Time/Date Setup

You can set the time and date from the Set Time & Date screen.

•When the time is set it is stored in the keypad and sent to the control panel when you press the Apply icon and answer Yes to the following prompt. Additionally, when using the keypad, the panel may download its time into the keypad periodically after the clock is set (for Vista residential and newer commercial panels such as Vista 128BPT).

•If Get Time is pressed, the keypad downloads the time and date from the control panel and exits the Set Time & Date screen.

Note: This icon ( ) appears with residential panels and may not appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time, do the following:

ICON			ACTION	NOTES
1.			From the “Home” screen, press the Setup and System	If DST On is selected, the keypad adjusts for Daylight
			Setup icons.	Savings time at the month, week and time chosen.
2.			Press the Time/Date Setup icon; enter an Authorized Code.
	3.		Press the DST icon if you want daylight savings time to
			affect your system clock.
		4.	Set the “Start DST” time and then the “End DST” time by	Make sure "DST On” is checked to enable this feature.
			pressing the Month, Weekend and Hour that you want
			DST to start.

5.APPLY saves the settings.

Setting Current Time and Date

To set the current time, do the following:

ICON ACTION NOTES

1.Press the Time/Date Setup icon; enter an Authorized Code. After each selection the window closes automatically and

2.	Press the Month "arrow"; and select the current month.	the selection is displayed.
3.	Press the Year that is being displayed and enter the	Select if you want a 12-hour or 24-hour format for your
	current year.	time display by pressing the circle to the left of the 12 Hour
4.	Press the Hour that is being displayed and enter the	display.
5.	current hour.	A confirmation screen is displays:
	Press the Minutes that is being displayed and enter the	“Time Setting Confirmation
6.	current minute.	Set time on the security system as well?”
	Press AM or PM. (Each depression switches the AM/PM display).	Yes or No
7.	Press the MMDDYY “arrow”, and select a format for which	Yes saves the time changes in your security system.
8.	you want the year to be displayed.	No saves the changes to the keypad only.
	Press Apply.	Note: A Yes response is recommended.

29