Honeywell 800-08091V3 manual User Setup, Authority Levels, How to Add a User

User Setup

User Setup allows you to Add a User, Delete a User, and Edit a User. You may access User Setup from the System Setup screen. Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features and functions. The keypad can hold the identity for 10 Users in its memory. If additional Users are needed, define the additional Users using the Console Emulation Mode.

Users for the system are programmed in a central user setup location that provides the specific questions for authorization levels assigned to different users. You may want these users to be the same, but there are situations in which you may want a user to have limited capabilities. These capabilities are defined by the Authority Level assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. The following information describes the authority levels that can be assigned through the keypad and provides the equivalent authority level name found in your alarm system manuals. The authority levels that can be assigned are as follows:

Authority			Functions			Equivalent System Name
						Residential	Commercial
Level						Systems	Systems
Master			Can perform all security functions, add/delete users in assigned partition,			Partition Master	Level 1 Master
			program scheduled events, and change partition master code
Normal			Perform security functions (arm, disarm)			Standard User	Level 3 Operator A
Guest			Can arm the system in assigned partitions, but cannot disarm the system			Guest	Level 4 Operator B
			unless the system was armed with this code.
			Note: Do not assign this level if Quick Arm is enabled in your system.
No			Used to restrict access from a partition.			N/A	N/A
Access
How to Add a User
	ICON			ACTION		NOTES
		1.		From the "Home" screen, press the Setup icon.	On the Data Entry screen, enter the user information.
		2.		Press the System Setup icon.	• Use the Shift key for capital letters
		3.		Press the USER SETUP icon.	• Use the BS (Backspace) key to make corrections.
		4.		Press the ADD USER icon and enter your Authorized	• The @#$ key is not available for use at this time. These
				Code.	characters cannot be saved to the control panel.
		5.		Press the Enter User Name field.
		6.		Type in the user name (6 characters max.; no spaces
				between characters) and press the OK icon.

26