Honeywell 800-08091V3 manual User System Setup, Advanced Setup, System Information, Keypad Reset

User System Setup

Advanced Setup

Advanced Setup allows access to the System Information, Keypad Reset, Keypad Test, Night Setup and Output Setup menus.

System Information

To view the latest software version installed on your system, do the following:

ICON	ACTION	NOTES
	1. From the “Setup” screen, press the System	The Software Version is displayed on the lower right of screen.
	Setup and then the Advanced Setup icons.	If necessary visit the Tuxedo Toolkit at:
	2. Enter your authorized code.	http://www.tuxedotouchtoolkit.com/index.html for more information.

Keypad Reset

ICON		ACTION	NOTES
	1. From the “Home” screen, press the Setup,		When the Keypad Reset icon is pressed, the message is displayed:
		System Setup and Advanced Setup icons.	Processor Reset
			Are you sure you want to reset? Select Yes or No.
2.		Enter your Authorized Code.
			If the keypad requires resetting, press OK and the keypad resets. If
3.		Press the Keypad Reset icon.
			Cancel is selected, the keypad is not reset.

Keypad Test - A series of diagnostic tests are provided that allows verification of correct operation of the keypad and its connections to the security system. There are a total of five diagnostic tests; LCD Display Test, Audio Test, LED Test,

Calibration Test and Z-Wave Test.

Performing Diagnostic Tests

Select any diagnostic test from the “Diagnostics” screen by pressing the associated Test icon. All or any individual test may be run when you access the “Diagnostics” screen; however, each test must be performed one at a time. At any time when a test is not being performed, you can press back to return to the previous screen or home to return to your home page.

Note: Once the Diagnostics screen is exited, subsequent entry to this screen displays all test options as "Not Performed."

LCD Display Test

ICON		ACTION	NOTES
	1.	Press the Advanced Setup icon.	After each type of display, you are asked if the display was proper.
	2.	If applicable, enter your Authorized Code.	If the response to all questions is yes, the LCD Display Test message
	3. Press the Keypad Test icon.		area of the Diagnostics screen displays “Passed”.
	4.	Press the LCD Display Test icon; a series of	The Emergency screen cannot be accessed while running the LCD
			Display Test.
		screens appear.
Audio Test
ICON		ACTION	NOTES
	1.	Press the Audio Test icon; "Testing.." is displayed	When you press Yes, "Passed" is displayed in the test status column on
		while beeps sound from the speaker.	the "Diagnostics" screen.
	At the conclusion of the test, a pop-up "Confirmation Window"		When you press No, "Failed" is displayed in the test status column on
			the "Diagnostics" screen.
	is displayed with the question "Did you hear Beeping?"

30