Honeywell 800-08091V3 manual System Troubles, About the System contd

About the System (cont'd)

System Troubles

The “Security” screen also displays an Icon(s) if a system trouble(s) occurs. If a Trouble Icon is shown, contact your alarm company. The following Icons may be shown as applicable to your system:

ICON

FUNCTION

AC Loss – The system is not receiving AC power.

Bell Failure – The system bell or siren has a problem. Note: This Icon displays when interfacing with residential panels only.

Expander Failure – The system has a failure in an expansion module.

Low Battery – The system battery, that powers the system during an AC power loss, is low.

LRR Supervision Failure – The Communication Device used to communicate with the central station has a supervision failure.

Max Attempts Exceeded – The system has exceeded the maximum attempts to communicate with the Central Station.

Pager Failure – The system cannot communicate with an assigned pager.

Telco-1 Cut – The system is not able to communicate with the central monitoring station over the primary phone line.

Telco-2 Cut – The system is not able to communicate with the central monitoring station over the secondary phone line.

Wireless Failure – The system is not able to communicate with its wireless devices.

Note: If multiple faults exist, press the More Choices icon and then the Show Zones icon to view and scroll through the complete list of faults.

8