Honeywell 800-08091V3 manual Camera Setup, Multi-Mediacont’d

Multi-Media (cont’d)

ICON			ACTION				NOTES
	6. To remove an image from the slide show, select					Press the TOP button to move up one level in the directory.
	the image, and press the Deselect Image icon.					Press the OPEN button to view larger images and/or open directories,
	To set a picture as wallpaper:					select from the list of stored images.
	1. Use the slide bar to scroll through the list of					Press the CLEAR ALL button to clear all pictures from the current slide
	pictures and highlight the file you want to be					show rotation.
	displayed on the keypad screen.					NOTE: On the “Home” screen press the Minimize Home icon to reduce
	2. Press the Set Wallpaper icon; view your selection					the “Home” screen icons and to have better visibility of the Wallpaper.
	from the “Home” screen.					Press the Maximize Home icon to maximize the “Home” screen icons.
Picture	Icons
Play	Previous	Next	Add	Deselect	Set	Minimize Home	Maximize Home
Image	Image	Image	Image	Image	Wallpaper

Camera Setup

The Camera feature allows you to enroll cameras and view up to four cameras at one time using the quadrant view feature. If using existing (mounted) cameras, go to Step 4 below. If this is a first time setup, scan/configure the cameras prior to mounting and then follow the steps below.

To set up a camera, do the following:

ICON		ACTION		NOTES
	1.	Connect an Ethernet cable to the back of your	Notes:
		camera (LAN); connect the opposite end to the	1. QuickTime® media player must be installed on your PC.
		Ethernet port on your router.
	2.		2.	Camera resolution should be 5 fps (5 frames per second) or lower.
		Apply power to the Camera. It may take a few	3.	Camera viewing is not compatible if using Opera web browser.
	3.	seconds for initial power-up of camera.	4. Compatible cameras include: iPCAM-PT, iPCAM-WO and iPCAM-WI2
		Press the Multi-Mediaand Camera icons (or		(and WI2B).
		press the Camera icon from the “Home” screen)		Note: Some older versions of these cameras may need a firmware
		and then press the Camera Setup icon.		upgrade; see separate instructions.
			IMPORTANT: Use the web browser to view cameras for non-security
	4.	Press the Scan icon to locate the camera. The
			purposes only. Camera streams viewed from the web browser can stop
		screen displays: “Scanning For Cameras. Please
			without indication due to network connection issues.
		Wait… “	Initial camera setup cannot be performed over a wireless connection.

24