User System Setup (cont'd)
ICON |
| ACTION | NOTES | |||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| 7. | Select the | Note: This command does not control door | |||
|
| |||||||||
|
|
|
|
|
|
|
| modules, dimmer On/Off switches and receptacles. | locks or any other security enabled devices. | |
|
|
|
|
|
| |||||
|
|
|
|
|
|
| ||||
|
|
|
|
| 8. | Select the |
| |||
|
| |||||||||
|
|
|
|
|
|
|
| modules, dimmer On/Off switches and receptacles. |
| |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
Night Setup
To set the NIGHT function, press the System Setup and Advanced Setup icon and then do the following:
ICON |
| ACTION | NOTES | ||
|
|
|
| ||
| 1. | Enter your Authorized Code, if required. | The NIGHT function can be set to arm the system in one of five | ||
| 2. | Press the Night Setup icon. | arming modes: Away - Stay - Instant - Night | ||
|
|
| 3. Select the arming mode to be activated when NIGHT is | Apply accepts the setting. Back cancels your selection. | |
|
| ||||
|
|
|
| selected on the "Arming" screen. | |
|
|
|
|
|
Output Setup Function
The Output Setup screen displays output selections. A maximum of 18 outputs can be enabled or disabled on the Output screen. To set the Output Setup function, press the System Setup and Advanced Setup icon and then do the following:
| ICON |
| ACTION | NOTES | |
|
|
|
|
|
|
|
|
| 1. | Enter your Authorized Code, if required. | This is a local setting for the graphic keypad. If user has the |
|
|
| 2. | Press the Output Setup icon. | maximum number of keypads on the system, and wants to disable |
|
|
| 3. | Select the outputs to display on the Output screen | the same output for all, each keypad needs to be set individually. |
|
|
| Apply accepts the setting. Back cancels your selection. | ||
|
|
|
| by pressing enable or disable and then press Apply. | |
|
|
|
|
|
Output Setup Icons
|
|
|
|
|
|
Output Disable | Output Enable | ||||
|
|
|
|
|
|
Apply
Back
32