Security (cont'd)
How to Arm the System
Arming the system in any mode is performed in the same way, as described below.
Note: Close all perimeter windows and doors before arming.
Arm the system as follows:
ICON | ACTION | NOTES | ||
|
|
| 1. From the “Home” screen, press the | Note: If Quick Arm is Not enabled in your system, a message to enter your |
|
|
| SECURITY icon. | User Code is received. |
|
|
| 2. Press the selected arming icon. | When the system is armed for Stay, Night Stay and Instant mode, the |
|
|
| keypad beeps 3 times. | |
|
|
| ||
|
|
| When the system is armed for Away and Maximum mode, you will hear | |
|
|
| arming and whether or not there is an entry delay | |
|
|
| steady beeps then rapid beeping during the last 10 seconds of Exit Delay. | |
|
|
| ||
|
|
| When exit delay time expires, the screen automatically changes to indicate | |
|
|
| delay time, and | |
|
|
| the system is "Armed". | |
|
|
|
|
|
Note: For
How to Arm Multiple Partitions
Note: Some systems may not have multiple partitions and the “Arm
ICON | ACTION | NOTES |
| |
1. | From the “Home” screen, press the | Notes: |
| |
| Security icon and then the Arm Multi- | • A user may have access to some or all of the available partitions. | ||
| Partition icon. | • If the user code is accepted, the system displays the partitions that | ||
2. | Select the appropriate arming mode. | the user has access to. |
| |
When exit delay time expires, the screen automatically changes to indicate | ||||
3. | Enter the User Code authorized to access | |||
the system is "Armed". |
| |||
| other partition(s). |
| ||
|
|
| ||
4. | Highlight the partition from the list on |
|
| |
| the screen, and press OK. | Note: If any zones are bypassed, a “Display Faults” ( | ) icon is | |
5. | Select ALL to arm all partitions listed. | displayed on this screen. |
|
11