Honeywell 800-08091V3 manual Setup contd, Adjust the Screen Timeouts, Clean Screen, Routine Care

Setup (cont'd)

Note: If using a Z-Wave thermostat with Celsius as your degree preference, the temperature can be adjusted by 0.5 degree increments.

Adjust the Screen Timeouts

When the keypad is left idle, it automatically:

•turns the “Backlight Off After” the selected backlight off time has expired (unless “Never” option is selected).

•returns to the “Home” screen after the selected “To Homepage After” time has expired (unless “Never” option is selected), and

•if enabled, the “Auto Slideshow After” time begins the slide show.

To select the desired screen timeouts, from the "Home" screen, do the following:

ICON	ACTION	NOTES
1.	Press the Setup icon.	If changes are made, when you exit a Settings Changed! pop-up window is
2.	Press the Disp & Audio Setup icon.	displayed asking “Remember New Settings?“
3. Enter your “Authorized Code", if required.		Settings include: Backlight Off After X time, Return To Homepage After X
		time, Auto Slideshow After X time.
4.	Press to select from the drop-down list
		Note 1: The “To Homepage After” option is only available if the Screen
5.	displaying the time period for each option.	Blackout (EN50131 Display) option is not enabled by the installer.
	Press the Back icon.	Note 2: When in EN50131 mode, “Auto Slideshow After” is preset to “1” minute
Yes saves the change. No discards the change.		and can not be changed.

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free. Clean the touch-screen as follows:

ICON		ACTION	NOTES
	1.	Press the Setup icon.	At the "Touch Screen Disabled for =30 Seconds" screen, the touch-screen
	2.	Press the Disp & Audio Setup icon.	should be wiped clean of fingerprints using a mild soap solution and a soft
	3.	Enter your “Authorized Code", if required.	cloth. When the counter reaches zero, the window automatically closes and the
			touch-screen is active.
	4.	Press the CLEAN SCREEN icon to disable
			A pop-up window displays "Touch Screen will be disabled so that you
		the keypad for 30 seconds.
			may wipe the screen clean. Please use a damp, soft cloth. DO NOT use
	5.	Press Continue to disable the touch-screen.	any liquids, sprays, or ammonia-based cleansers. Press CONTINUE to
	6.	Press Cancel to exit.	disable touchscreen." **Panics cannot be initiated during this process**

NOTE: The Emergency screen cannot be accessed while running in the clean screen mode.

IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the touch-screen or damage may occur.

Routine Care

•Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected doors or windows.

•Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and smoke detectors.

•Keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water or any other fluid on the units.

19