Honeywell 800-08091V3 Setup contd, Fixed IP Addresses, Icon, Action, IP Setup icon, Account Setup

Setup (cont'd)

Fixed IP Addresses

If the IP Address is not displayed in the lower left-hand corner on the Tuxedo Touch Keypad “Home” screen, you may require a “Static” (Fixed) IP Address that can be found by accessing your router. Refer to your router instructions for further information. To access “IP Setup”, do the following:

ICON	ACTION	NOTES
1. At the Tuxedo Touch Keypad:		• Use the Shift key for capital letters
a)	Press the Setup icon and then press the
		Use the Data Entry Keyboard to enter the required information.
	IP Setup icon.	• Use the BS (Backspace) key to make corrections.
b) Press the button next to Obtain an IP address
		• Press OK
	automatically to de-select it and manually
	enter the desired IP Address you want to
	assign to the keypad.
c) Enter the “IP Address” by pressing the first set		A pop-up window displays the message:
	of 3 zeros (“000”) on the screen, and enter the
	first three numbers of the IP address on the	Settings Changed! Remember new settings?
		Select Yes to save the settings.
	“Data Entry Keyboard”. Repeat this step until
		Select No to cancel.
	the complete address has been entered and
	press Apply.
2. At your PC, Smart Phone or Tablet Browser:

a)Start your browser and enter your IP Address.

Refer to “Automatic IP Addresses” Step 2 on previous page.

Account Setup

Account setup provides a browser log-on page for each user (for higher security) when viewing from a web enabled device or PC on a different sub-net. To set up a user account, do the following:

ICON		ACTION	NOTES
	To set up a User Account:		Note: Account Setup allows you to add up to 5 users.
	1.	Press the Account Setup button.	Use the Data Entry Keyboard to enter the required information.
	2.	Press the User Name field and enter a user name
			• Use the Shift key for capital letters
		on the “Data Entry Keyboard”; press OK.
			• Use the BS (Backspace) key to make corrections.
	3.	Press the “User Password” field and enter a user
			• Press OK
		password; press OK.	• Press abc/@#$ to switch between letters and symbols.
	4.	Press the Save icon; the new user is displayed on	A pop-up window displays the message:
	5.	the screen.	Settings Changed!
		Press Apply.	Remember new settings?
	6.	To delete a user, press the Delete button next to	Select Yes to save the settings.
		that user’s information.	Select No to cancel.

21