02Connecting up
Rear panel
HDMI
| OUT |
|
| IN 3 |
| IN 2 |
| IN 1 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SYSTEM
6
ANTENNA
AM LOOP
IN | 1 | IN | 2 |
OPTICAL
DIGITAL
or
7
Side panel
L
R
ANALOG
AUDIO IN
Receiver subwoofer
From digital audio output (optical)
From Audio output
To HDMI input
Caution
•These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.
•Do not connect any speakers other than those supplied to this system.
•Do not connect the supplied speakers to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in malfunction or fire.
•After connecting the plugs, pull lightly on the cables to make sure that the ends of the cables are securely connected to the terminals. Poor connections can create noise and interruptions in the sound.
•If the cables’ wires happen to be pushed out of the terminals, allowing the wires to come into contact with each other, it places an excessive additional load on the amp. This may cause the amp to stop functioning, and may even damage the amp.
TV
5If you have a DVD player or other source1 component you want to connect, connect it now before connecting the power cord in the next step.
See page 38 for how to connect a digital source component.
6Connect the receiver subwoofer to your TV.
•Connect the HDMI OUT jack on receiver subwoofer to an HDMI input on your TV.
7Connect an audio cable from your TV to the receiver subwoofer.
•To listen to TV audio on this unit, you must connect the TV’s audio output to an audio input jack on this unit. You can connect by either a digital (optical) or analog audio cable. For digital audio, connect to DIGITAL OPTICAL IN 1 on the receiver subwoofer. To use the HDMI Control function when you are connected to a supported Pioneer plasma display, you must connect via HDMI.
•You must first set ‘TV Input’ to switch the audio from a plasma display with the HDMI Control function or to switch the input source of this unit to TV audio and operate your TV with the supplied remote control. For more information, see Operating Pioneer plasma displays and TVs on page 21 and Audio input settings from Plasma displays (TV Input) on page 48.
Note
1 Make sure to connect a TV or monitor (for video sources) to take advantage of this system’s home theater potential. Please refer to the instruction manual supplied with your TV or monitor for connection details.
14
En
