Additional information
Chapter 10
Additional information
Important | Setting up the remote to control your TV | |
• RCV Press to set the remote control to receiver | ||
You can use the supplied remote to control your TV. To be | ||
control mode in order to operate the receiver | able to use this feature you first have to program the | |
subwoofer (make sure that the LCD displays the | remote with a maker code from the table on the following | |
RECEIVER screen, as shown below). | page. |
10
English
RECEIVER | ||
SURR | ADV | F.S. |
SURR | SURR | |
Dimming the display
You can choose to dim the display of the display unit if you find it too bright.1
1 SETUP Press SETUP.
| ENTER |
2 | Select ‘System Setup’ then press ENTER. |
ENTER
2Press and hold the TV button and press SETUP. The TV preset screen is shown on the remote control, and the current maker code is displayed on the LCD screen.
TV PRESET |
| ||
| 3 5 1 |
| Maker code |
1 | 2 | 3 |
|
4 | 5 | 6 | Number buttons |
7 | 8 | 9 |
|
CLEAR | 0 | ENTER | ENTER |
|
| EXIT |
|
3 | Select ‘Dimmer’ then press ENTER. |
| ENTER |
4 | Select ‘Dimmer Light’ or ’Dimmer Dark’ |
Setting the sleep timer
The sleep timer switches off the receiver subwoofer after a specified time so you can fall asleep without worrying about it.
•SLEEP Press to select an option. Choose between the following options:
•Sleep On – Switches off after about an hour
•Sleep Off – Cancels the sleep timer
3Use the number buttons to input the maker code for your TV, and press ENTER.
See the table on the next page for the list of maker codes. If there is more than one code given for your make, input the first one in the list.
•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.
4Point the remote towards your TV and pressSOURCE to check that the remote works with your TV.If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.
After selecting Sleep On, you can press SLEEP again to check how much time is left. Each line indicates approximately 12 minutes (remaining):
S l e e p - - - - -
Note
1 The display of the display unit dims when the sleep timer is set, regardless of this setting.
49
En
