Surround sound settings
Chapter 7
Surround sound settings
Important | 1 SETUP Press SETUP. |
•RCV Press to set the remote control to receiver
control mode in order to operate the receiver |
| ENTER | |
2 | Select ‘Sound Setup’ then press ENTER. | ||
|
subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below).
07
English
ENTER
RECEIVER | ||
SURR | ADV | F.S. |
SURR | SURR |
Using the Sound Setup menu
From the Sound Setup menu you can access all the surround sound settings of the system.
During setup, the speakers are represented by the following letters:
•L – Front left speaker
•C – Center speaker
•R – Front right speaker
•SR – Surround right speaker
•SL – Surround left speaker
•SW – Subwoofer
3 | Select ‘ChannelLevel’, then press ENTER. |
4 | Use the / buttons to select a channel |
or the / buttons to adjust the level of that | |
channel. | |
| • You can adjust the level of each channel by ±10 dB.2 |
5 | ENTER Press once when you’re finished. |
•If you use the Auto MCACC feature again, it will overwrite the settings you have made here.
Speaker distance setting1
The Auto MCACC feature (see page 28) should give you the best surround sound setup. However you may find that by further adjustment of the speaker distance settings you can improve the surround sound in your listening room.
Set the distance of each speaker from your normal listening position.
Channel level setting1
The Auto MCACC feature (see page 28) should give you | 1 |
| ENTER |
the best surround sound setup. However you may find | SETUP | Open the ‘Sound Setup’ menu. | |
that by further adjustment of the channel levels you can |
|
|
|
improve the surround sound in your listening room. |
| ENTER |
|
This method of setting the channel levels allows you to | 2 |
| Select ‘Distance’ then press ENTER. |
listen to a source and adjust the levels of each playback |
|
|
|
channel. |
|
|
|
A further method of setting the channel levels is to use | 3 |
| Use the / buttons to select a speaker |
the test tone method. See Adjusting the channel levels | or the / buttons to adjust the distance. | ||
using the test tone on page 37 for more on this. | Each speaker can be adjusted from 0.5ft to 45.0ft. | ||
| 4 | ENTER Press ENTER when you’re finished. | |
|
| • If you use the Auto MCACC feature again, it will | |
|
| overwrite the settings you have made here. |
Note
1 When this function is set while MCACC Effect is on, the value for the same function adjusted with the Auto MCACC feature is overwritten. When MCACC Effect is off, the value set here is applied, regardless of the value adjusted with the Auto MCACC feature. (The Auto MCACC setting is not overwritten.)
2 The range of adjustment is limited when the volume level is set over 51.
35
En