Pioneer SX-LX70SW HDMI Control, Before using synchronization, Synchronized amp mode, confirm

09HDMI Control

Setting the Auto Delay

This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The audio delay time is automatically adjusted according to the video delay time.

1 SETUP Press SETUP.

	ENTER
2	Select ‘HDMI Setup’ then press ENTER.
	ENTER
3	Select ‘Auto Delay’, then press ENTER.
	ENTER
4	Select ‘A.Delay On’ or ‘A.Delay Off’ then

press ENTER to confirm.

Tip

•This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lip-sync’) for HDMI or HDMI Control. If you find the automatically set delay time unsuitable, set A.Delay to Off and adjust the sound delay settings manually (page 32).

Audio input settings from Plasma displays (TV Input)

To listen to audio from a plasma display on this device, you will need to connect an audio cable other than an HDMI cable. From this menu, set the audio input to that which you would like to connect. Press TV on the remote control to switch this unit to the input source selected here. This setting is changed to the selected input and the audio from the plasma display is output from this device.

Select from inputs Digital 1, Digital 2 and Analog.

1 SETUP Press SETUP.

ENTER
2	Select ‘System Setup’ then press ENTER.
ENTER
3	Select ‘TV Input’, then press ENTER.
ENTER
4	Adjust the setting then press ENTER to
confirm.

48

Important

•You must set this setting to activate the HDMI Control function.

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power ON for all components, with the power for the plasma display being turned on last.

3Choose the HDMI input to which the TV is connected to this unit, and see if video output from connected components displays properly on the screen on not.

Synchronized amp mode

Synchronized amp mode begins once you carry out an operation for the plasma display. For more information, see the operating instructions of your plasma display.

Synchronized amp mode operations

By connecting a component to this unit with an HDMI cable you can use synchronized amp mode, which allows you to synchronize the following operations:

•Displays on the plasma display when you mute or adjust the volume of this unit.

•The input of this unit is automatically changed when playback occurs on a connected component.

•Even if you change this unit’s input to a device that is not connected by HDMI, the synchronized amp mode remains in effect.

•By pressing GENRE when listening to a source from an HDD/DVD recorder, the most appropriate listening mode is automatically selected (page 31).

Canceling synchronized amp mode

If you cancel synchronized amp mode while connected via HDMI to a plasma display or while you are watching a TV programme, the power for this unit is turned off.

En