Other connections | 08 |
Connecting an iPod
You can use the iPod jack on the display unit to playback music from an iPod. All operations can be carried out via the iPod. Use the supplied iPod cable to connect an iPod to this unit.
•When you connect an iPod, this unit’s input automatically switches to iPod.
•Certain iPod models have connectors that are not compatible with this unit.
Display unit
|
|
| DISPLAY UNIT |
SYSTEM | F.AUDIO | iPod | MCACC |
|
| SETUP MIC |
iPod
iPod R | iPod cable | |
| iPod |
|
Music | > |
|
Extras | > |
|
Settings | > |
|
Shuffle Songs
Backlight
MENU
Listening to an external audio source
To listen to audio from a connected external component on this unit, choose its input function on the remote control. Some Pioneer products can be controlled via this remote.
1If the system isn’t already on, press RECEIVER to switch on.
Also make sure that the external source (TV, satellite receiver, etc.) is switched on.
2LINE Select an audio input source.
Input sources are cycled through as shown below:
Digital 1 | Digital 2 |
| Analog |
|
Front Audio In 
iPod 
The LCD screen changes to that of the selected input source.
3Press the button for the appropriate connected component.
When a connected component is not displayed on the screen, or when you have connected a component not manufactured by Pioneer, press RCV button to put the remote control on the receiver subwoofer operation screen.
4If necessary, start playback of the external source.
English
iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.
39
En
