03Controls and displays
Using the remote control
Please keep in mind the following when using the remote control:
•Make sure that there are no obstacles between the remote and the remote sensor on the unit.
•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.
•Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.
•Replace the batteries when you notice a fall off in the operating range of the remote.
•Use within the operating range in front of the remote control sensor on the display unit, as shown.
30
30
23 ft.
Operating the remote control
The supplied remote control can control not only the receiver subwoofer, but also other Pioneer products such as a plasma display, DVD player,
To operate these components, orient the remote control toward the display unit.
Operating the receiver subwoofer
•RCV Press to display the RECEIVER screen. The RECEIVER screen is shown on the remote control’s LCD screen, and the remote is switched to Receiver mode.
RECEIVER | ||
SURR | ADV | F.S. |
SURR | SURR |
Choosing and operating a source component
1 |
| HDMI |
|
|
|
|
| ||
1 | 2 | 3 | TV TUNER XM SIRIUS LINE | |
Press to cycle through connected components. | ||||
The selected component changes, and the LCD screen | ||||
on the remote control changes to that of the appropriate | ||||
component. |
|
|
•To select input for Digital 1, Digital 2, Analog, Front Audio In, or iPod, press the LINE button until the desired input function is shown on the display unit.
2Choose the input source you are using when you have selected HDMI 1 to HDMI 3 or LINE.
The LCD screen changes to that for the selected component, and you can then operate the desired component.
HDD/ | BD | DVD | |
DVR | |||
|
| ||
|
| EXIT |
HDMI input
HDD/ | BD | DVD | |
DVR | |||
|
| ||
TV |
|
| |
|
| EXIT |
LINE input
• When the desired source cannot be found, or when you have a component not manufactured by Pioneer connected, press RCV to put the remote control into Receiver mode. The input for this unit remains unchanged.
26
En