Lexmark X54x, 26C0230, 26C0231, X544DN Using the Embedded Web Server, Setting up e-mail alerts, 192

Models: X544DN 26C0231 26C0230 X54x

1 245
Download 245 pages 41.65 Kb
Page 192
Image 192

8Press .

Submitting changes appears.

9Press , and then press until Ready appears.

Note: Power Saver settings can also be adjusted by typing the printer IP address into the address field of your Web browser.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions:

Configuring printer settings

Checking the status of the printer supplies

Configuring network settings

Viewing reports

Restoring the factory default settings

Viewing the virtual display

Setting Web page password protect

Setting Panel PIN protect

Setting the date and time

To access the Embedded Web Server:

1Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

2Click one of the tabs to access information about the printer, change settings, or view a report.

Note: If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh to access printer menus.

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.

To set up e-mail alerts:

1Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

2Click Settings.

3Under Other Settings, click E-mail Alert Setup.

Administrative support

192

Page 192
Image 192
Lexmark X54x, 26C0230, 26C0231, X544DN manual Using the Embedded Web Server, Setting up e-mail alerts, 192