Menu item

NPA Mode

Off

Auto

Network Buffer

Disabled

Auto

Mac Binary PS

On

Off

Auto

Network Setup

Reports Menu Network Card menu TCIP Menu

IPv6 Menu Wireless menu AppleTalk menu

Description

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

Notes:

Auto is the factory default setting

Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the network input buffer

Notes:

Auto is the factory default setting.

The value can be changed in 1-K increments.

The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.

To increase the maximum size range for the Network Buffer, disable or reduce the size of the USB buffer.

Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

Notes:

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

Lists all the network setup menus, regardless of the active network of the printer

Note: Certain options are not available on selected printer models.

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

Note: This menu is available only for network models or printers attached to print servers when an optional wireless internal print server is installed in the printer.

Understanding printer menus

121

Page 121
Image 121
Lexmark 26C0230, X54x, 26C0231, X544DN manual Wireless menu, 121