Menu item

Timeouts

Print Timeout

Disabled 1–255

Timeouts

Wait Timeout Disabled 15–65535

Print Recovery

Auto Continue

Disabled 5–255

Print Recovery

Jam Recovery

On

Off

Auto

Print Recovery

Page Protect

On

Off

Description

Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job

Notes:

90 seconds is the factory default setting.

When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.

Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs.

Sets the amount of time in seconds the printer waits for additional data before canceling a print job

Notes:

40 seconds is the factory default setting.

Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs.

Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period

Notes:

Disabled is the factory default setting.

5–255 is a range of time in seconds.

Specifies whether the printer reprints jammed pages

Notes:

Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.

On sets the printer to always reprint jammed pages.

Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

Notes:

Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.

On sets the printer to process the whole page so that the entire page prints.

Understanding printer menus

126

Page 126
Image 126
Lexmark 26C0231, X54x, 26C0230, X544DN manual 126